puaka

iTrader: (5)

Hey fellas,

My FB has been sitting for the last 5 years waiting for me to finish it. The only real hold up I have is adapting my S5 TII intake to my 4 port motor. I built the motor with a turbo conversion in mind down the road. So, I need a plate that adapts the bolt patterns and accomodates the 2 primary injectors. I thought about going to a local machine shop but would feel better working with someone a little more rotary savvy who can easily visualize what I'm after. So, any recommendations are super appreciated.

Cheers,
Mike

flight_of_pain

I am working on one, it is one of the few pieces left to get my 7 up and running. I already have 1in plate stock and a new set of end mills just begging to be run. I was toying with the idea of making more than one if the demand was there.

Isaac

turbo_dave

iTrader: (50)

This is a plate I made so I can bolt up the turbo intake onto a 12a.making one from turbo 13b to oldschools 4 port 13b is even easier.just take the s5 turbo lim gasket to a machine shop and have them duplicate the shape onto a piece of aluminum plate.have them do all the 4 ports but you drill and tap the bolts.

puaka

iTrader: (5)

Thanks for the replies, fellas.

Flight, I'm seriously interested in this.

Dave, we're already talking, and, as you know, I'm ready to get this going. This is really the only specialized piece keeping me from getting my FB back on the road and in proper state.