I have seen it before but I cannot find it now. Yes, I have run a couple searches.

Someone was talking about talking the thottle bodie injection off a 1300 cc susuki, which uses 4 x 40 mm setup. The throttle body came with four injectors.

Anyone else seen this thread before or know of someone doing this?

 

yes, but i think the project died out. just as many do that involve fuel injection. hell there was a huge setup that was supposed to have kits made by that S.R.E site and what happened with that??? N O T H I N G. it makes sense though, it's so much work and time that most people just break lose from it. if your not injected now, just get a good carb setup. it's worth it.

 

I have a good carb (a Dell) and it runs great on the track. My challenge is that we are getting emission testing in my area and I need to be able tune the system to pass the test. The big two barrel I have will never idle and pass smog.

I had been planning on going with a Megaquirt and GM throttle body injection, but I wanted to look at the susuki setup again.

Thanks for your thoughts.

 

Bump...