Steering Hub suggestions?
#1
Full Member
Thread Starter
iTrader: (1)
Join Date: Jan 2012
Location: Toronto
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
Steering Hub suggestions?
I have an old Personal steering wheel from a Fiat my dad drove in the 70s that I would love to put on my SA.
I understand that all SA's, FB's, FC's and some Miatas share the same steering spline and that my wheel one of the two standard 6 bolt patterns that wheels use (2.75" & 2.875", myself being the later).
My question is, does anybody have any suggestions on which hub to buy?
I took a glance at eBay and see tons of cheap adapters, some with quick release, some without.
Any advice would be appreciated!
Kam
I understand that all SA's, FB's, FC's and some Miatas share the same steering spline and that my wheel one of the two standard 6 bolt patterns that wheels use (2.75" & 2.875", myself being the later).
My question is, does anybody have any suggestions on which hub to buy?
I took a glance at eBay and see tons of cheap adapters, some with quick release, some without.
Any advice would be appreciated!
Kam
#4
Full Member
Thread Starter
iTrader: (1)
Join Date: Jan 2012
Location: Toronto
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
Sorry I guess I should have clarified.
Are all SAs, FBs, FCs and Miata's on the same spline pattern?
This won't be the first time I've been burned by the "Oh, SA's are different" curse.
Cheers,
Kam
Are all SAs, FBs, FCs and Miata's on the same spline pattern?
This won't be the first time I've been burned by the "Oh, SA's are different" curse.
Cheers,
Kam
#5
its supposed to do that
Isaac
#7
Never Follow
iTrader: (18)
Unless it was an aftermarket wheel made specifically for the car, which is unlikely. So yes it probably has some kind of aftermarket hub on there. There are probably exceptions, but most aftermarket hubs have one of two possible bolt patterns. One that fits momo/grant etc and the other that fits Sparco. At least I believe that's how it's split, I can't remember if Sparco was the odd pattern, or if it was Nardi...
Anyway, yes SA and FB should all be the same, and I think FC's share the same spline size, although the Momo hub is a different part number.... Confusing isn't it?
Anyway, yes SA and FB should all be the same, and I think FC's share the same spline size, although the Momo hub is a different part number.... Confusing isn't it?
Trending Topics
#8
Now w/ 12A SP
iTrader: (3)
Just to add to 82ta's response it's all RX-7's through the FD chasis and most early miata. I have seen fc's running late fb wheels and fd factory steering wheels so, those adapters SHOULD work too. I have an fc adapter I got from Summit Racing for $20 for an old style Grant 3 spoke.
Sent using RX7Club for Android.
Sent using RX7Club for Android.
Last edited by PK_12A; 05-03-13 at 11:21 AM.
Thread
Thread Starter
Forum
Replies
Last Post