Some Pictures of my SE
Some Pictures of my SE
Just wanted to share some art of my car. As you can see on the blue statz picture it has the breakdown of my car. This is a 1.3liter turbo 6port 13b, running on 5psi on stock ecu. I will soon be pushing 7psi once I place the Boost controller stepper motor under the hood ;] ....enjoy
Trending Topics
Some near future of the car. I will be adding two 1200cc injectors in the plenum along with getting etheir a Haltech F5 or going all out with a E6K. If I do go with the e6k I will be redoing the intake right before the plenum in aluminum such as "lucky7305" I am in the process of polishing and refinishing some 15" SSR mesh wheelz. So these should be on within the next few months. A Mazdatrix short shifter is on my mind "evil grin"... Getting the greddy profec b spec II intalled to boost 7psi. A new paint job ordered to the oem paint code. Along with some speacial care additive on the side moldings to make them black again ;] Someday soon I will take the time to clean my maroon Rx-7 floor matts to install them. They are just so pretty dont think I will ever put my feet on them.
Originally Posted by StricklyOldskool
Someday soon I will take the time to clean my maroon Rx-7 floor matts to install them. They are just so pretty dont think I will ever put my feet on them.
Well we all have to start somewhere. As far as my setup I do have a FMIC and running with the Cartech FMU it helps make it safe up to 7psi which is what the kit was designed for. The timing was marked dead center with the 15degree mechanical advance. I have been running this setup for over a year with no troubles.
The oil cap came with the car.....but I have seen serveral different ones everywhere...from ebay to rx7 internet stores.....
The oil cap came with the car.....but I have seen serveral different ones everywhere...from ebay to rx7 internet stores.....




