1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

Some carb issues.

Thread Tools
 
Search this Thread
 
Old Nov 26, 2005 | 02:11 PM
  #1  
O 16581 72452 5's Avatar
Thread Starter
The infamous number guy!
Tenured Member 10 Years
 
Joined: Dec 2002
Posts: 1,953
Likes: 0
From: Terre Haute, IN.
Some carb issues.

When turning on my fuel pump, my carb drips gas at a pretty high rate, almost a steady stream, it's only from the two barrels close to the firewall. Also, when stepping on the gas and watching the butterflies, the secondaries do not open, are they vacuum activated or something?

Obviously, my car won't start...
Reply
Old Nov 26, 2005 | 03:35 PM
  #2  
nakedfzone's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Sep 2005
Posts: 106
Likes: 0
From: Birmingham, AL
General observation:
Sounds like your float bowl adjustment is set too high, or the float valve is stuck open. And yes the secondaries on either a stock carb or the RB Holley are vacuum operated.
Reply
Old Nov 26, 2005 | 11:47 PM
  #3  
FB II's Avatar
Banned. I got OWNED!!!
 
Joined: Dec 2002
Posts: 4,192
Likes: 0
From: wishing i was back in FL
yea, your secondaries are fine. pull the top of the carb off and lower the rear float closest to the firewall.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
FC3S Timmy
2nd Generation Specific (1986-1992)
16
Oct 3, 2015 01:08 AM
rotor_veux
2nd Generation Specific (1986-1992)
3
Sep 28, 2015 09:25 PM
Devon Murray
New Member RX-7 Technical
1
Sep 26, 2015 08:15 AM




All times are GMT -5. The time now is 02:03 PM.