1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

SMOKIN'....really bad...

Thread Tools
 
Search this Thread
 
Old Dec 21, 2004 | 01:09 AM
  #1  
truckin56's Avatar
Thread Starter
Newbie
 
Joined: Dec 2004
Posts: 2
Likes: 0
From: SoCal
SMOKIN'....really bad...

Ok Hi everyone,
I'm new to these things...just got a '80 rx-7. It smokes like the dickens....is this a symptom of worse things to come or can it be remedied without rebuilding the motor??? Runs fine otherwise.
-Matt
Reply
Old Dec 21, 2004 | 01:15 AM
  #2  
woodonastick's Avatar
my fb is older than me
Tenured Member 15 Years
iTrader: (1)
 
Joined: Aug 2004
Posts: 690
Likes: 0
From: San Jose
wat color is the smoke? hows it smell?

my guess would be a a bad seal

bad seal = rebuild
Reply
Old Dec 21, 2004 | 01:21 AM
  #3  
IanS's Avatar
Ricer
Tenured Member 15 Years
iTrader: (4)
 
Joined: Jun 2004
Posts: 4,424
Likes: 1
From: Washington, Iowa
does it stop smoking ever? Like maybe after it warms up. Could be alot of things. Coolant, oil, fuel.
Reply
Old Dec 21, 2004 | 01:27 AM
  #4  
truckin56's Avatar
Thread Starter
Newbie
 
Joined: Dec 2004
Posts: 2
Likes: 0
From: SoCal
not sure really....but hypothetically lets say its blue...and lets say its black....and that it stops after it warms and that it smokes all the time....give me some situational info...
Reply
Old Dec 21, 2004 | 02:06 AM
  #5  
IanS's Avatar
Ricer
Tenured Member 15 Years
iTrader: (4)
 
Joined: Jun 2004
Posts: 4,424
Likes: 1
From: Washington, Iowa
blue is oil, white is coolant (also smells sweet). Black is probably too rich. If stops after warm up most likely it is oil and it is kind of normal for that to happen in a rotary. If smokes all the time it is most likely a possible bad OMP (oil metering pump) in which case it may be stuck wide open (not really bad, could not be working at all). For coolant it could be a crack in housing and leaking coolant through a water passage, or maybe the o-rings on the intake manifold are **** and leaking coolant into the intake ports. Really, there are alot of different scenarios that it could be. Giving some specifics could really narrow it down quite a bit.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
FuLLsMoKe
1st Generation Specific (1979-1985)
11
Aug 14, 2003 06:44 PM




All times are GMT -5. The time now is 06:04 AM.