Show Me Your Tail Pipes! ;)
#56
I actually own Rotaries
iTrader: (40)
here is my dumpy
I like this look
#58
I actually own Rotaries
iTrader: (40)
3in inlet... 4 out
#63
35r 13b first gen
iTrader: (3)
Join Date: Apr 2002
Location: Richland Center WI
Posts: 1,290
Likes: 0
Received 0 Likes
on
0 Posts
sorry this is the best pic i have of the rear end right now... i love this look big single... 3.5 in muffler... also one underneath... see if i can find my sound clip video...
#64
35r 13b first gen
iTrader: (3)
Join Date: Apr 2002
Location: Richland Center WI
Posts: 1,290
Likes: 0
Received 0 Likes
on
0 Posts
heres the clip... dont mind me blabbing i made the video for the judge when i went to court to fight an exhaust ticket with hobbyist plates... guess i have to upload to youtube. my file wont work on here...
#68
35r 13b first gen
iTrader: (3)
Join Date: Apr 2002
Location: Richland Center WI
Posts: 1,290
Likes: 0
Received 0 Likes
on
0 Posts
I would not recommend a chambered steel only muffler such as a flowmaster... i had that underneath previously.... very very tinny/ tingy sounding... a straight though ss bullet underneath was much quieter than that... that was on a 2.5in system with RB header and ricer straight through on back with 5 in tip... it was really loud either way..
#75
Environmentally-Hostile
Best pic I have:
Racing beat muffler with down-under style dumpy tip. I like it.
This is the old setup:
I didn't like how small the muffler was, and I really didn't like how loud it was. The tip is actually the same, I cut it off this muffler and welded it onto the new one. This time, however, it's pointed straight down, I didn't like the side-dump look.
Racing beat muffler with down-under style dumpy tip. I like it.
This is the old setup:
I didn't like how small the muffler was, and I really didn't like how loud it was. The tip is actually the same, I cut it off this muffler and welded it onto the new one. This time, however, it's pointed straight down, I didn't like the side-dump look.