1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

short video of exhaust

Thread Tools
 
Search this Thread
 
Old Jul 3, 2007 | 07:16 PM
  #1  
81gsl12a's Avatar
Thread Starter
blown up motors
Tenured Member 15 Years
iTrader: (1)
 
Joined: Sep 2004
Posts: 1,325
Likes: 1
From: morganton, NC
short video of exhaust

http://www.youtube.com/watch?v=39lJoxAD_1c
the car does not leak the spots on the ground are from spilling stuff at diff points the 1st thing you hear in the video is the aeromotive fule pump

let me know what you think... the oil psi is around 45-50 at idle

yes this is the same exhaust i posted about yesterday talking aobut you can hear it 2 miles away errr
Reply
Old Jul 3, 2007 | 07:37 PM
  #2  
Sgt.Stinkfist's Avatar
premix, for f's sake
Tenured Member: 20 Years
iTrader: (6)
 
Joined: Jun 2004
Posts: 1,438
Likes: 5
From: madison, WI
sweet
Reply
Old Jul 3, 2007 | 07:42 PM
  #3  
85rx12a's Avatar
fasterthanaspeedingticket
 
Joined: Dec 2006
Posts: 305
Likes: 0
From: Odessa TX. USA
****** sweet what battery is that.
Reply
Old Jul 3, 2007 | 07:48 PM
  #4  
Jeezus's Avatar
Stu-Tron Get Yo Groove On
Tenured Member: 15 Years
iTrader: (5)
 
Joined: Nov 2006
Posts: 8,482
Likes: 31
From: Huntsville AL
LOUD! I love it!
Reply
Old Jul 3, 2007 | 11:20 PM
  #5  
rotaxrave's Avatar
TRIANGLES!!!
Tenured Member 10 Years
 
Joined: Aug 2006
Posts: 140
Likes: 0
From: MT USA
I know a kid that has his exhaust unbolted after the manifold and its loud as **** but annoying and it sounds like yours. I think a presilencer would help with haveing strait pipe. IT soulds awesome though cause it comes out the back instead of under the car. Nice ignition too

sick rx7
Reply
Old Jul 4, 2007 | 12:21 AM
  #6  
MountainScreamer's Avatar
Senior Member
Tenured Member 10 Years
 
Joined: Dec 2006
Posts: 272
Likes: 0
From: Sylva, NC
Killer!! love the interior too, or lack thereof.
Reply
Old Jul 4, 2007 | 12:25 AM
  #7  
dj55b's Avatar
Banned. I got OWNED!!!
iTrader: (2)
 
Joined: Oct 2004
Posts: 6,122
Likes: 1
From: London, Ontario
She's Sounding great ... one thing though .. that plastic balck piece on the holley carb you've got there, i have that same one and removed it after finding out that we actually lossed about 3whp from it ... It might be just how my intake is setup but that is what i've found through my own way
Reply
Old Jul 4, 2007 | 12:36 AM
  #8  
RXEVEN85's Avatar
Art in Motion
Tenured Member 10 Years
iTrader: (1)
 
Joined: Mar 2007
Posts: 273
Likes: 0
From: Orlando fl
thats sweet sound.im new to rx7 only had mine for 3 months.I love it more more every day.Music to ears.
Reply
Old Jul 4, 2007 | 12:51 AM
  #9  
3rd and final 7's Avatar
wheres the water goin?
Tenured Member 10 Years
iTrader: (9)
 
Joined: May 2005
Posts: 1,586
Likes: 0
From: Nor Cal
sounds great!! got a question if you dont mind how safe is your fuel pump setup location?
Reply
Old Jul 4, 2007 | 12:59 AM
  #10  
84stock's Avatar
Lives on the Forum
Tenured Member: 20 Years
iTrader: (5)
 
Joined: Apr 2003
Posts: 5,547
Likes: 12
From: calgary
What size carb are you running?? And which one??
Reply
Old Jul 4, 2007 | 01:36 AM
  #11  
81gsl12a's Avatar
Thread Starter
blown up motors
Tenured Member 15 Years
iTrader: (1)
 
Joined: Sep 2004
Posts: 1,325
Likes: 1
From: morganton, NC
Originally Posted by 85rx12a
****** sweet what battery is that.
it is a harley davidson buell battery... its like 11lbs 650 cca and its 90 bucks
Reply
Old Jul 4, 2007 | 01:38 AM
  #12  
81gsl12a's Avatar
Thread Starter
blown up motors
Tenured Member 15 Years
iTrader: (1)
 
Joined: Sep 2004
Posts: 1,325
Likes: 1
From: morganton, NC
Originally Posted by 3rd and final 7
sounds great!! got a question if you dont mind how safe is your fuel pump setup location?
safe as any other... if some1 rear ends me then it would suck either way... the car was built for street racing... if its just a DD car its not worth doing but it does look sweet
Reply
Old Jul 4, 2007 | 01:38 AM
  #13  
81gsl12a's Avatar
Thread Starter
blown up motors
Tenured Member 15 Years
iTrader: (1)
 
Joined: Sep 2004
Posts: 1,325
Likes: 1
From: morganton, NC
Originally Posted by 84stock
What size carb are you running?? And which one??
its a racings beat 430cfm
Reply
Old Jul 4, 2007 | 01:39 AM
  #14  
81gsl12a's Avatar
Thread Starter
blown up motors
Tenured Member 15 Years
iTrader: (1)
 
Joined: Sep 2004
Posts: 1,325
Likes: 1
From: morganton, NC
Originally Posted by dj55b
She's Sounding great ... one thing though .. that plastic balck piece on the holley carb you've got there, i have that same one and removed it after finding out that we actually lossed about 3whp from it ... It might be just how my intake is setup but that is what i've found through my own way
how did you find out? dyno time? a write up?
Reply
Old Jul 4, 2007 | 11:03 AM
  #15  
dj55b's Avatar
Banned. I got OWNED!!!
iTrader: (2)
 
Joined: Oct 2004
Posts: 6,122
Likes: 1
From: London, Ontario
It was on an actual Dyno, I don't have the sheets to prove it, but i did it when i did my 6 runs last fall. But like i said it could be application specific, my setup has a K&n filter and a k&n Xtream Lid on there. I don't have a reason as to why it really did it, but thats what my results were with it.
Reply
Old Jul 4, 2007 | 02:16 PM
  #16  
Jeff20B's Avatar
Lapping = Fapping
Tenured Member 15 Years
iTrader: (13)
 
Joined: Aug 2001
Posts: 15,725
Likes: 91
From: Near Seattle
It sounds a little like an open pipe. It's got that sound to it. I bet it's quite loud in real life.
Reply
Old Jul 4, 2007 | 03:22 PM
  #17  
aussiesmg's Avatar
Thunder from downunder
Tenured Member 10 Years
iTrader: (1)
 
Joined: Mar 2001
Posts: 3,843
Likes: 1
From: Convoy, Ohio, USA
Nice hood lightening job by the way....
Reply
Old Jul 4, 2007 | 10:56 PM
  #18  
81gsl12a's Avatar
Thread Starter
blown up motors
Tenured Member 15 Years
iTrader: (1)
 
Joined: Sep 2004
Posts: 1,325
Likes: 1
From: morganton, NC
Originally Posted by aussiesmg
Nice hood lightening job by the way....
thanks lol didint think many ppl would notice it good job

it was all done with a plasma cutter
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
4sfeedit
3rd Generation Specific (1993-2002)
10
Aug 16, 2015 01:42 PM




All times are GMT -5. The time now is 09:25 PM.