1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

serondaries always on?

Thread Tools
 
Search this Thread
 
Old Apr 28, 2003 | 02:19 PM
  #1  
Matty's first 1st Gen's Avatar
Thread Starter
Boosted 7
Tenured Member 10 Years
 
Joined: Jan 2003
Posts: 824
Likes: 1
From: Mississauga, Ontario
serondaries always on?

Ok, i just removed my air pump acv, and AAB, and it was running ok, a little hard to start but it was ok, now the idle is screwed up, i boosted the idle to about 1500 to keep it going, and i took a look in the carb, and the secondaries are closed but (from the passanger side) the right secondary is pouring gas on to the closed butterfly. Anyone got any ideas?
Reply
Old Apr 28, 2003 | 04:11 PM
  #2  
wwilliam54's Avatar
it WILL run
Tenured Member 10 Years
 
Joined: Dec 2002
Posts: 2,017
Likes: 1
From: Raleigh,MS
accel pump adjusted wrong?
Reply
Old Apr 28, 2003 | 07:07 PM
  #3  
specRX7_22's Avatar
Rotary Enthusiast
Tenured Member 05 Years
 
Joined: Nov 2002
Posts: 1,013
Likes: 0
From: Eastern PA
wait, so the secondaries dont open? is that what your saying? if the secondaries dont open check the linkage on the back of the carb. its a cable with a "T" shaped end that fits onto another piece (the same way the E-brake linkage is). if that piece is off, the secondaries wont open. if i completely misunderstood your question.... just ignore this
Reply




All times are GMT -5. The time now is 02:19 AM.