SE won't stay running at idle
#1
Full Member
Thread Starter
iTrader: (1)
Join Date: Sep 2002
Location: toronto,can
Posts: 178
Likes: 0
Received 0 Likes
on
0 Posts
SE won't stay running at idle
Just did a motor swap from my running se changed all vac lines when i did the swap. Now she starts and goes through the rpm band noproblem but when you get off the throttle to let it idle she stalls out can't figure it out need help please and thanks. Sorry put new fuel pump and filter,wires plugs on. checked afm and did check what the fsm said.
#2
Lives on the Forum
iTrader: (13)
Did you make sure that you plugged the harness back in that goes to the AFM?
Check the air intake hose that goes from the AFM to the T/body and make sure that it is tight where the hose joins together at the clamp. Also at the AFM and T/body and make sure the small bypass hose is hooked up that comes out of the hose near the T/body.
Other standard things are vacuum leaks.
Check the air intake hose that goes from the AFM to the T/body and make sure that it is tight where the hose joins together at the clamp. Also at the AFM and T/body and make sure the small bypass hose is hooked up that comes out of the hose near the T/body.
Other standard things are vacuum leaks.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
CaptainKRM
2nd Generation Specific (1986-1992)
14
08-26-15 09:52 PM