1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

SE Gas Tank

Thread Tools
 
Search this Thread
 
Old 07-31-11, 09:33 AM
  #1  
Work in Progress

Thread Starter
iTrader: (9)
 
82FanTC's Avatar
 
Join Date: Aug 2006
Location: Minneapolis
Posts: 569
Likes: 0
Received 1 Like on 1 Post
SE Gas Tank

I just put an SE gas tank in my GS. Didn't realize until it was all bolted up and that the connection for the sending unit is different. What usually is done to correct this? Swap the sending unit in from the old tank or put on a different female connector that will accept the one from the SE unit?

Thanks
Old 07-31-11, 10:40 AM
  #2  
Round and Round

iTrader: (10)
 
74RX4's Avatar
 
Join Date: Aug 2002
Location: SW Florida
Posts: 1,516
Likes: 0
Received 3 Likes on 3 Posts
Three wires in a late model fuel sending unit plug. Plug is shaped like two eyes and a mouth. Black is Ground in the mouth position. Yellow goes direct to fuel gauge in the left eye position. Yellow/Blue is the warning light that your car doesn't have in the right eye position. These positions are in the plug, so the "eyes" are opposite side on the sending unit plug. Leave the Yellow/ blue wire unused and connect the other two to your plug.
Old 07-31-11, 04:38 PM
  #3  
Work in Progress

Thread Starter
iTrader: (9)
 
82FanTC's Avatar
 
Join Date: Aug 2006
Location: Minneapolis
Posts: 569
Likes: 0
Received 1 Like on 1 Post
Worked like a charm! Thanks




All times are GMT -5. The time now is 04:06 AM.