Hey, I thought that I would let you all know that I am STILL looking for a new job.

I got an incredible response from my first posting of this and lots of great references too.

I still am unemployed and its getting really tight here.
I now have expanded to all cars and even boats.

I have done TONS of brakes, tune-ups, various repir work on exterior and interiors, stereo installs, and also I have just rebuilt a 20' starcraft BOAT.

With the help of those on this forum, I have hung in there, and I thank you all..

so, once again...

I am offering my garage and my labor to all those needing work on their RX7!!!

I have owned several of these cars, and have been doing this for years now.

I have all the special factory tools required to perform anything from an engine swap, to rebuilding and refurbising your interior!

I have a code scanner, a rotary compression tester, engine hoist, full air tools, and much more in my well stocked garage.

You can rent my space and use anything I have for your project...

OR

I can fix almost EVERYTHING on your late model 2ND gen car!

And I can refurbish/repair nearly ANYTHING on any OTHER car. (RX7 or otherwise)

I have restored interiors on older and newer cars countless times.

SO, get a quote from your local mechanic, drop me a line, here or by email, and I WILL make it worth your while.

I know what I know, and I know what I dont know. If I can't help you, i'll say so....

BUT..... If i can, I promise i'll do it as good as (most of the time BETTER than) your local shop, or NO LABOR CHARGE!

Your satisfaction is guaranteed.

If you want to know more about me, my attitude twards these cars, and how fanatical i'll be when working on yours, just search for all posts by me.

Read and you'll see, that I will make sure you leave in 100% better condition than when you arrived.

Where else will you find someone to work on your car, cheaper than the big shops, that you KNOW isn't trying to cut corners, or get onto the next customer!

Help me out, while I look for my next big job, and I'll make sure you get what you need done and then some!

I can provide references of others whos cars I have worked on, and show you pictures of my RX7 projects in progress.

I promise to impress.

Reply here, OR email me below....

Lets help each other out!!!

EMAIL: burnsl@charter.net

Lawrenceville, GA 30043

 

Have you rebuilt a 20b? (Just curious)

-Error402

 

No, but thats not really more difficult than a 13b.

Theres the two part E-Shaft. but thats all.
Different tourque specs.

I ca do it, no problem!

 

I need to meet with you to get the wiper switch done. Email me when you have time to.

 

How far from Valdosta are you?Do you work on carbs? How muck to solve my fuel/ timing problem?

peace

 

can you rebuild transmission 5-speed?

jr

 

I can get the tranny rebuilt.

The labor to remove and install it would be where I save you, that, in conjunction with a deal i might be able to work on a rebuilt tranny.

Call me (404) 713-5348

 

How far from valdosta?

Im in Lawrenceville, 30043.

I put this in my original message to assist people in determining distance.

 

Hi do you still work on Mazda RX7? I am looking for someone who can work on mine. I live in Georgia. Thanks

 

Dude this post is almost 20 years old.. SMH