rx7 ignition 1980?
08-29-03, 01:15 PM
#1
Junior Member
Thread Starter
Join Date: Aug 2003
Location: PA VERY NEAR NY
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
rx7 ignition switch 1980?
any one know if mazda 626 ignition switch will fit a 1980 rx7
or what will fit ?
or what will fit ?
Last edited by CHUCKCAT; 08-29-03 at 01:27 PM.
08-29-03, 01:21 PM
#2
The most common swap is to an '81 or above (FB)distributor.
The advantage is that the ignitors are mounted right on the distributor body, rather than using a long run of wire to the remote mounted box on the '80. This helps eliminate the false triggering noted on the '80 system.
The advantage is that the ignitors are mounted right on the distributor body, rather than using a long run of wire to the remote mounted box on the '80. This helps eliminate the false triggering noted on the '80 system.
Thread
Thread Starter
Forum
Replies
Last Post
KAL797
Test Area 51
0
08-11-15 03:47 PM
