1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

Replacement Front Mats Source

Thread Tools
 
Search this Thread
 
Old May 5, 2025 | 12:39 PM
  #1  
Slow_sevens's Avatar
Thread Starter
Senior Member
 
Joined: May 2021
Posts: 678
Likes: 288
From: California
Replacement Front Mats Source

Where are you guys sourcing front floor mats? Looks like any available used oem are ratty and expensive, so OK with new copies, or even something that does not match original graphics but is at least cut to the correct shape? Car is an 81.
Thanks
Reply
Old May 5, 2025 | 01:39 PM
  #2  
yeti's Avatar
Rotary Enthusiast
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (1)
 
Joined: Mar 2006
Posts: 1,015
Likes: 69
From: Knoxville, TN
I bought mine from garage alpha they later sold to sakebomb. I liked them but I think there is a difference between SA and FB because my passenger side doesn't fit right. I asked them about it and they were sure there wasn't a difference.. So maybe it's supposed to be misshappen at the bend from floor to firewall? I like the design, fit, and all that otherwise!

https://garagealpha.com/collections/...mats-oem-style
Reply
Old May 5, 2025 | 01:51 PM
  #3  
Rotnbrit's Avatar
Junior Member
Liked
 
Joined: Mar 2025
Posts: 26
Likes: 14
From: Piedmont, South Carolina
Have you looked at the ones Mazdatrix sells? They look like the right pattern. There may be a difference difference between SA and FB models, but they have both.
Reply
Old May 5, 2025 | 02:10 PM
  #4  
t_g_farrell's Avatar
Waffles - hmmm good
Tenured Member: 20 Years
Community Favorite
iTrader: (1)
 
Joined: Jul 2004
Posts: 9,198
Likes: 440
From: Lake Wylie, N.C.
I got mine from a guy named @JasonS here on the site. Excellent mats. Got two fronts and the full rear mat with the fronts having an RX-7 logo in white on the black mats. That was back in 2013, so not sure he is still doing this now.
Reply
Old May 9, 2025 | 06:40 PM
  #5  
Slow_sevens's Avatar
Thread Starter
Senior Member
 
Joined: May 2021
Posts: 678
Likes: 288
From: California
Originally Posted by yeti
I bought mine from garage alpha they later sold to sakebomb. I liked them but I think there is a difference between SA and FB because my passenger side doesn't fit right. I asked them about it and they were sure there wasn't a difference.. So maybe it's supposed to be misshappen at the bend from floor to firewall? I like the design, fit, and all that otherwise!
Interestingly enough Mazdatrix sells two different mats... One for 79-80, the other for 81-85.
Reply
Old May 11, 2025 | 07:39 PM
  #6  
Rotnbrit's Avatar
Junior Member
Liked
 
Joined: Mar 2025
Posts: 26
Likes: 14
From: Piedmont, South Carolina
Originally Posted by Slow_sevens
Interestingly enough Mazdatrix sells two different mats... One for 79-80, the other for 81-85.
I just bought a set for my 82 from Mazdatrix which are made by Lloyds a Covercraft company. They fit perfect and match the original carpet very well. They even have eyelets and anchors for keeping the driver's mat in place.
Reply
Old May 12, 2025 | 11:27 AM
  #7  
Slow_sevens's Avatar
Thread Starter
Senior Member
 
Joined: May 2021
Posts: 678
Likes: 288
From: California
Went with the GarageAlpha. Was sucked in my the little silver logos! Few weeks until I see them though.
Reply
Old May 12, 2025 | 09:36 PM
  #8  
yeti's Avatar
Rotary Enthusiast
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (1)
 
Joined: Mar 2006
Posts: 1,015
Likes: 69
From: Knoxville, TN
Those little metal badges will do that to ya!
Reply
Old May 13, 2025 | 07:24 AM
  #9  
t_g_farrell's Avatar
Waffles - hmmm good
Tenured Member: 20 Years
Community Favorite
iTrader: (1)
 
Joined: Jul 2004
Posts: 9,198
Likes: 440
From: Lake Wylie, N.C.
Shiny bits!
Reply
Old Jun 4, 2025 | 11:54 AM
  #10  
Slow_sevens's Avatar
Thread Starter
Senior Member
 
Joined: May 2021
Posts: 678
Likes: 288
From: California
Mats arrived. Advertised as designed to fit FB perfectly. Should I be unhappy?



Reply
Old Jun 4, 2025 | 05:29 PM
  #11  
Seniorchief's Avatar
seniorchief
Veteran: Navy
Tenured Member: 25 Years
Liked
Community Favorite
 
Joined: Feb 2001
Posts: 604
Likes: 350
From: Indianapolis, IN
I would be!
:-(
Reply
Old Jun 4, 2025 | 05:35 PM
  #12  
Toruki's Avatar
Rotary Enthusiast
Tenured Member: 15 Years
Liked
Loved
Community Favorite
 
Joined: Oct 2010
Posts: 1,294
Likes: 345
From: MA USA
Are they meant to shift forward a few inches?
Reply
Old Jun 4, 2025 | 06:34 PM
  #13  
t_g_farrell's Avatar
Waffles - hmmm good
Tenured Member: 20 Years
Community Favorite
iTrader: (1)
 
Joined: Jul 2004
Posts: 9,198
Likes: 440
From: Lake Wylie, N.C.
I think you need to push them up a bit so they fit better.
Reply
Old Jun 4, 2025 | 08:52 PM
  #14  
Rotnbrit's Avatar
Junior Member
Liked
 
Joined: Mar 2025
Posts: 26
Likes: 14
From: Piedmont, South Carolina
Mine from Mazdatrix do not have that indentation. I think you need to push it forward until that offset covers the rubber square.

Lloyds mats for FB.

Last edited by Rotnbrit; Jun 4, 2025 at 08:57 PM.
Reply
Old Jun 6, 2025 | 12:56 PM
  #15  
Slow_sevens's Avatar
Thread Starter
Senior Member
 
Joined: May 2021
Posts: 678
Likes: 288
From: California
Ok I am an idiot. Took TJ and Rotnbrit’s advice and slid them forward a couple of inches and now they fit perfectly.

And Garage Alpha / Mazdatrix replied very quickly to my ‘do I have the right mats’ question. There is a compound curve forward right of the foot well that the mat is cut around.

if any village is short an idiot, I am available.

and Rotnbrit… you a Brit or am I misreading your tag?




Last edited by Slow_sevens; Jun 6, 2025 at 12:59 PM.
Reply
Old Jun 6, 2025 | 02:03 PM
  #16  
Rotnbrit's Avatar
Junior Member
Liked
 
Joined: Mar 2025
Posts: 26
Likes: 14
From: Piedmont, South Carolina
Originally Posted by Slow_sevens

and Rotnbrit… you a Brit or am I misreading your tag?
Nope, I'm as American as they come. I chose the tag as a combination of my interest in British cars and rotaries. I've been working on cars for nearly 50 years.
Reply
Old Jun 9, 2025 | 07:00 PM
  #17  
elwood's Avatar
Rotary Freak
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Mar 2003
Posts: 1,587
Likes: 46
From: https://t.me/pump_upp
I think anything with an eyelet or two is better -- in any vehicle. I got so tired of my floormats sliding forward, I made little stainless steel brackets that fasten through the eyelets and anchor to the front seat mount bolts. Now, the mats stay put, and I'm happy.

BTW -- many newer cars have a snap feature built into the carpet that does the same thing.
Reply
Old Jun 17, 2025 | 05:22 PM
  #18  
TopGunM2k's Avatar
TopGunM2k
Tenured Member: 20 Years
Liked
Loved
Community Favorite
 
Joined: Sep 2004
Posts: 302
Likes: 27
From: San Jose, CA
Anyone use the ACC brand sold on Rock Auto? There's a pair for $63 and another for $93 that is thicker in material. They advertise it being a direct fit and don't seem too expensive compared than what the other options are.

"Floor mats can improve your interior's look with very little effort. Protect your carpet from all the foot traffic and improve the look of your interior with an ACC brand floor mat. ACC Floor Mats are manufactured in all the same true automotive-grade materials and colors as their carpet flooring products which ensures a great match. All ACC Floor Mats are die cut based on your year, make, and model vehicle for a perfect fit. Don't settle for a set of floor mats that are only close in color to your vehicle's carpet, choose the ACC brand floor mats that will complete your vehicle's interior!"
Reply
Old Jun 18, 2025 | 09:32 AM
  #19  
t_g_farrell's Avatar
Waffles - hmmm good
Tenured Member: 20 Years
Community Favorite
iTrader: (1)
 
Joined: Jul 2004
Posts: 9,198
Likes: 440
From: Lake Wylie, N.C.
Interesting. I would give it a try if I needed some. Mine cost a lot more than that, and that was 10+ years ago. You can always return them if you don't like em (I guess).
Reply
Old Jun 18, 2025 | 02:07 PM
  #20  
gracer7-rx7's Avatar
needs more track time
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (16)
 
Joined: Mar 2006
Posts: 9,729
Likes: 784
From: Bay Area CA
I'd be inclined to get the ones from Mazdatrix and support a rotary vendor - while we still have them...
Reply
Old Jun 18, 2025 | 06:39 PM
  #21  
dmc83RX's Avatar
Full Member
Tenured Member 15 Years
 
Joined: Jan 2007
Posts: 93
Likes: 9
From: SC
Tried both from Rock Auto. Both fit well. The less expensive wore out quickly, the more expensive thicker are holding up very well.
Reply
Old Jun 18, 2025 | 07:53 PM
  #22  
TopGunM2k's Avatar
TopGunM2k
Tenured Member: 20 Years
Liked
Loved
Community Favorite
 
Joined: Sep 2004
Posts: 302
Likes: 27
From: San Jose, CA
Originally Posted by dmc83RX
Tried both from Rock Auto. Both fit well. The less expensive wore out quickly, the more expensive thicker are holding up very well.
Awesome, thanks for the feedback as I was undecided between the two. I will be getting the thicker one as the price is very reasonable IMO.
Reply
Old Jun 18, 2025 | 07:55 PM
  #23  
TopGunM2k's Avatar
TopGunM2k
Tenured Member: 20 Years
Liked
Loved
Community Favorite
 
Joined: Sep 2004
Posts: 302
Likes: 27
From: San Jose, CA
Originally Posted by gracer7-rx7
I'd be inclined to get the ones from Mazdatrix and support a rotary vendor - while we still have them...
They are about the same price as the one's on Rock Auto - how is the quality of the Mazdatrix one's?
Reply
Old Jun 20, 2025 | 01:42 PM
  #24  
Rotnbrit's Avatar
Junior Member
Liked
 
Joined: Mar 2025
Posts: 26
Likes: 14
From: Piedmont, South Carolina
Originally Posted by TopGunM2k
They are about the same price as the one's on Rock Auto - how is the quality of the Mazdatrix one's?
I think they are pretty good quality. Not too thin. The color matches better than this photo that used a flash.

Reply
Old Jun 30, 2025 | 07:16 PM
  #25  
TopGunM2k's Avatar
TopGunM2k
Tenured Member: 20 Years
Liked
Loved
Community Favorite
 
Joined: Sep 2004
Posts: 302
Likes: 27
From: San Jose, CA
Thanks for the pic; it's greatly appreciated. I like how they go all the way to the bottom and top. Do they move at all or stay planted good?
Reply



All times are GMT -5. The time now is 12:06 AM.