rear end gears
#1
Full Member
Thread Starter
Join Date: Oct 2003
Location: west milton ohio
Posts: 205
Likes: 0
Received 0 Likes
on
0 Posts
rear end gears
I have an 84 se, and I was wondering if there were any other rear ends that came with a better gear for acceleration, a bigger gear I guess. Id also be appreciative of anyone who could tell me exactly what gear I already have in there, I dont have the lsd rear end its the standard diff. thx
#4
Rotary Enthusiast
Another way to increase accelleration without changing ring and pinion is to go to a smaller diameter tire than stock.
So if the stock tire is a 14" rim and on its a 205/60/14 you could go 15" 205/50/15. Since the overall diameter of the wheel is less the car will accellerate faster thru the gears.
On my GSL-SE autox car I am running 13" 235/45/13, which works well when chasing pylons.
Tire and wheel calc
John
So if the stock tire is a 14" rim and on its a 205/60/14 you could go 15" 205/50/15. Since the overall diameter of the wheel is less the car will accellerate faster thru the gears.
On my GSL-SE autox car I am running 13" 235/45/13, which works well when chasing pylons.
Tire and wheel calc
John
#6
Rotary Freak
iTrader: (6)
The other way is to find a four wheel drive For Ranger pickup and take the ring and pinon out of the front dif. I believe it is the 94-96 models that work and have a 4.44 gear ratio. If you run a couple searchs or go to the solo maita website you can find the specifics.
Good luck
Good luck
Thread
Thread Starter
Forum
Replies
Last Post