Rear end
#1
Looking for Another RX7
Thread Starter
Join Date: Jan 2002
Location: West Bloomfield MI
Posts: 692
Likes: 0
Received 0 Likes
on
0 Posts
Rear end
Ok so driving my 83 agian for the first time in about a year, has given me very mixed feelings on selling my rex's. I really do want a new car but I would have to get rid of all the cars I have now. Anyways I have a 85' with a 5.12 LSD in it and was wondering if I can take the gears from my stock lsd and put them in with the lsd? So I would end up with like a 3.98lsd or whatever stock 83' non lsd rear is. Because the 5:12 is to much rearend for street you run out of steam fast you get to that point fast but its just not practical haha.
#3
Airflow is my life
Quote:
You can check out any time you like
But you can Never leave!
SO you have a 3.90 with an open rear, and a 5.12 on an LSD and you want to end up with a 3.90 with the lsd? Yes you can swap the LSD into the 3.90 diff. But you need the tools to measure and do it right. Read how to setup a ring and pinion in the FSM. See if you can tackle it.
You can check out any time you like
But you can Never leave!
SO you have a 3.90 with an open rear, and a 5.12 on an LSD and you want to end up with a 3.90 with the lsd? Yes you can swap the LSD into the 3.90 diff. But you need the tools to measure and do it right. Read how to setup a ring and pinion in the FSM. See if you can tackle it.
#6
Looking for Another RX7
Thread Starter
Join Date: Jan 2002
Location: West Bloomfield MI
Posts: 692
Likes: 0
Received 0 Likes
on
0 Posts
Haha I think I might keep the 5:12 everyone and their brother is trying to buy it off me. Neven know when I might want to do some serious drag racing . Anyways I probaly would just have my buddy's dad swap it for me. He has a trans shop and could do it. Thanks for the info. I also have a welded 4:88 but dont think I want to use that because the car is going to see street time.
Thread
Thread Starter
Forum
Replies
Last Post