Does anyone know the part number or where I can get the thrust bearings and washers that are used with the Re-Speed street front coil overs? Are these generic parts?

 

I beleive that they are standard parts, but not sure on #s or anything.

You can try to get ahold of Sam (DJ55B), or if that doesn't work then Billy Waits (Bwaits) might be able to help you out with the #s.

Good luck.



.

 

Haven't heard anything yet from emailing re-speed.

Anyone know the size of the thrust bearings?

 

Did you send Billy a PM?

 

Just take what you have to any bearing shop and they should be able to hook you up. Those thrust bearings certainly arn't anything fancy. I'd imagine Re-speed were using fairly common and easily obtainable bearings and fittings in most of their stuff.

 

If you know the size you should be able to find it here:

Scroll down the page:

McMaster-Carr

 

Thanks to a pm from Billy:

Thick Washer part number: 5909K61
Thin washer part number: 5909K47
Thrust Bearing part number: 5909K34

 

Funny, support from Billy and nothing from Sam

Wish Billy would buy back respeed

 

McMaster-Carr uses their own part numbers. They won't mean anything to anyone that works at a bearing house. Industry standard numbers for those parts are:

Thrust Bearing: NTA 1423 Torrington

Thrust Washer .032: TRA 1423 Torrington

Thrust Washer .126: TRD 1423 Torrington

 

Its not that Sam is quite that bad, Billy is just that good!!

They broke the mold..........

 

In Sam's defense, I didn't PM him, only sent an email to the re-speed account.

 

sam's a 'tard.