radiator e-fan
when u say "with an e-fan" do u mean it comes with one? otherwise, many ppl use the taurus fan, v6 i believe. i'm using one off a mitz galant, 93 i think it was. that's the best i could find in the dimensions i needed and would work, considering the rad i'm using. as for what to get as for the rad, just get what fits ur yr model.
Thread Starter
28th coming soon...
Joined: Apr 2010
Posts: 41
Likes: 0
From: ny
When u guys say Taurus u mean ford Taurus??
If so what year and model Taurus?I have an 84 gsl that I'm starting to mod.
Jeezus I saw ur thread on how to clean ur engine and all I have to say is that my girlfriend is not to happy with u
she knows where I'll b for the next couple of weekends. I want both the fan and the rad to look good. Aluminum or something like that.
Thanx for imput guys.
Eric.
If so what year and model Taurus?I have an 84 gsl that I'm starting to mod.
Jeezus I saw ur thread on how to clean ur engine and all I have to say is that my girlfriend is not to happy with u
she knows where I'll b for the next couple of weekends. I want both the fan and the rad to look good. Aluminum or something like that. Thanx for imput guys.
Eric.
When u guys say Taurus u mean ford Taurus??
If so what year and model Taurus?I have an 84 gsl that I'm starting to mod.
Jeezus I saw ur thread on how to clean ur engine and all I have to say is that my girlfriend is not to happy with u she knows where I'll b for the next couple of weekends. I want both the fan and the rad to look good. Aluminum or something like that.
Thanx for imput guys.
Eric.
If so what year and model Taurus?I have an 84 gsl that I'm starting to mod.
Jeezus I saw ur thread on how to clean ur engine and all I have to say is that my girlfriend is not to happy with u
she knows where I'll b for the next couple of weekends. I want both the fan and the rad to look good. Aluminum or something like that. Thanx for imput guys.
Eric.
Aluminum radiators are semi-hard to get for our cars, sometimes they are on ebay. I would go with a 2nd gen radiator, but be wary. Can't
remember if it is the S4 or S5, but one of them has the radiator cap on the
radiator, the other on the water pump. Obviously get the one with the cap on the
radiator.
And this should help with your Taurus fan:
https://www.rx7club.com/showthread.p...ghlight=Taurus
Trending Topics
Thread Starter
28th coming soon...
Joined: Apr 2010
Posts: 41
Likes: 0
From: ny
Wrkn Toyota, Rootn Wankel
Joined: Sep 2007
Posts: 1,642
Likes: 1
From: "Haystack" Hayward, CA
That radiator looks nice, but the fan is a single speed, the Taurus pulls/pushes more air in both modes than that one.
I think for that price you could get a nice Koyo Radiator, not sure.
Also, Jeezus, the S4 has the radiator cap on the thermostat housing, while the S5 has the cap mounted on the radiator. The only problem is that the S5 radiator is tall so if you mount it angled the cap will not clear the hood.
I think for that price you could get a nice Koyo Radiator, not sure.
Also, Jeezus, the S4 has the radiator cap on the thermostat housing, while the S5 has the cap mounted on the radiator. The only problem is that the S5 radiator is tall so if you mount it angled the cap will not clear the hood.
and unless you have the beehive oil cooler then this wont work. if you have the front mount oil cooler then, where is it going to go?
:AA:
:AA:
Derale 17" fan, custom Wizard Racing aluminum radiator...now, I freeze my butt off in winter since the coolant water never gets hot enough for the heater to work right. 
Actually, you can use either S4 OR S5. If you source one from a TII, the fill cap is in the center of the radiator. Last time I checked, you can get Koyos for about $150. Ford Taurus E-Fan from a mid to late 90s with the 3.8L only. You can pick them up from Pull-A-Part for $11. Those fans are two speed. I run mine on low with a 160* thermostat. My water temps after a hard pull from 1rst thru 3rd, never get over 175*. At 15psi I am almost 400 rwhp. Mods in the sig.
No lag!
Joined: Oct 2007
Posts: 418
Likes: 0
From: Six26
Ask me about my wankel
Joined: May 2006
Posts: 571
Likes: 0
From: Bay City, Michigan
http://www.rotary-works.com/mm5/merc...gory_Code=THBD
Nuff Said... I will be buying this after next years taxes with there oil cooler.
Nuff Said... I will be buying this after next years taxes with there oil cooler.
Bottom tube won't work with the factory bottom radiator hose....but I had to pay twice that much to get my custom radiator built from my drawings that does use all of the factory bits in all the correct places. 
Last edited by mar3; May 15, 2010 at 01:29 PM. Reason: Killd reply to deletd post, thread clean-up...
Ask me about my wankel
Joined: May 2006
Posts: 571
Likes: 0
From: Bay City, Michigan
What’s different about it? The only thing I see diffrent is the bottom hose is not angled 
would I just need a diffrent hose... But thanks for the heads up! guess I'll have to find something else.
would I just need a diffrent hose... But thanks for the heads up! guess I'll have to find something else.
Last edited by mar3; May 15, 2010 at 01:17 PM. Reason: Killd quote since reply was back-to-back to post in question....
Thread Starter
28th coming soon...
Joined: Apr 2010
Posts: 41
Likes: 0
From: ny
hey mar3 custom radiator??
very interested in hearing about that.
i have done some upgrades to the 7 and checked the radiator and it's going.
need to buy one very soon so not only do i need it to b efficient i wanted to look real nice(racey)i like the look of the aluminum once.looking to spend between 3-4 hundred on a radiator and e- fan.
very interested in hearing about that.
i have done some upgrades to the 7 and checked the radiator and it's going.
need to buy one very soon so not only do i need it to b efficient i wanted to look real nice(racey)i like the look of the aluminum once.looking to spend between 3-4 hundred on a radiator and e- fan.
