quick voltage question
#1
advanced novice
Thread Starter
Join Date: Aug 2006
Location: clarksville tn
Posts: 1,073
Likes: 0
Received 0 Likes
on
0 Posts
quick voltage question
on the gsl-se ecu i have. it gets all the proper voltages except for on V it only get like 6.5v what do i do this is the only thing that doesnt have that proper voltage what do i do.
#2
Full Member
Join Date: Jul 2002
Location: baltimore maryland
Posts: 244
Likes: 0
Received 0 Likes
on
0 Posts
first whats wrong with the car?
without looking indepth V and O on the ecu receive main voltage 12 - 14V off main relay. If O gets 12 - 14V and or elsewhere also gets 12 - 14V on the RW (red/white) wire then use you ohmmeter ( power on circuit must be OFF!!!) and check continuity for the RW wire going to V on the ecu.... locate suspected source of high resistance or bad/burned connection and repair.
without looking indepth V and O on the ecu receive main voltage 12 - 14V off main relay. If O gets 12 - 14V and or elsewhere also gets 12 - 14V on the RW (red/white) wire then use you ohmmeter ( power on circuit must be OFF!!!) and check continuity for the RW wire going to V on the ecu.... locate suspected source of high resistance or bad/burned connection and repair.
Thread
Thread Starter
Forum
Replies
Last Post
SakeBomb Garage
Group Buy & Product Dev. FD RX-7
8
10-09-15 10:05 PM
Nosferatu
2nd Generation Specific (1986-1992)
7
09-05-15 02:13 PM