Message me on AIM excitingleopard, i'll help you out.

 

if you are putting the header on a carb'd first gen then youdon't have an 02 sensor to install unless you are using and air /fuel ratio meter.

and no, the RB header won't come with an O2 bung.

 

take a look at this page http://www.dalhems.com/engine/ssheader.html for more info than you may need on header design

 

here is on of the better headers http://iscracing.net/exhaust.htm

 

Well i have an SE so i am not running a carbd setup, so if the header doesnt' have a bung, how does that work... will it run without the sensor? where do i put the sensor?

Zachstylez

 

My header came with a bung. I've heard of people complaining that their header for their GSL-SE or 2g didn't have one though.

 

you have to order it with the bung. its the header for the 84-91 13b 6 port. otherwise you get the one for the 4 port carb engine

 

you can always add a bung if you allready have the header

 

Help me out here....


Bung?

I'll read those article too.

 

Thanks a lot man... that's all i needed to know. ExcitingLeapord, if you look at ur stock exhaust manifold you will see a hose connecting to a metal sensor that goes straight into the manifold. That is your Oxygen sensor... it is pretty important if you want your car to run right. I was asking whether the RB header had it or if you have to make ur own... and like Kuhl said... you have to get the ones for the 84-91...

Zachstylez