question on porting
02-13-03, 04:43 PM
#1
Junior Member
Thread Starter
Join Date: Feb 2003
Location: carolina,Puerto Rico
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
question on porting
i need some advise on what combination should i do to my daily drive 13b.i want to build a13b 4port using a holley 650 what kind of port should i do the intermediate housing and to the front and rear housing.because iam confuse with street port and mild port what's the different.
02-13-03, 04:49 PM
#2
'Last Minute' Rallying
Join Date: May 2002
Location: Lincoln, England
Posts: 1,193
Likes: 0
Received 0 Likes
on
0 Posts
your going to like this ...
http://www.rotaryengineillustrated.c...-ports101.html
click on the buttons at the side of the lower image ... it will superimpose different types of port onto the side housing
http://www.rotaryengineillustrated.c...-ports101.html
click on the buttons at the side of the lower image ... it will superimpose different types of port onto the side housing
02-13-03, 05:06 PM
#3
I read your email
Originally posted by MikeLMR
your going to like this ...
http://www.rotaryengineillustrated.c...-ports101.html
click on the buttons at the side of the lower image ... it will superimpose different types of port onto the side housing
your going to like this ...
http://www.rotaryengineillustrated.c...-ports101.html
click on the buttons at the side of the lower image ... it will superimpose different types of port onto the side housing
Thread
Thread Starter
Forum
Replies
Last Post