This question is based on paranoia
07-02-06, 04:03 PM
#1
Full Member
Thread Starter
Join Date: Oct 2005
Location: washington st
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
This question is based on paranoia
Removed rats nest, Air pump, added weber 45mm hooked up OMP to the carb.
I can see the little bubbles moving, working thier little busy bodys to the carb.
My question is do i need to premix?
Thanks for your time, i hope you can help with my mental state ( you know what i mean ).
Dan
I can see the little bubbles moving, working thier little busy bodys to the carb.
My question is do i need to premix?
Thanks for your time, i hope you can help with my mental state ( you know what i mean ).
Dan
07-02-06, 04:54 PM
#3
Rotary Freak
Test the OMP.
It sould flow something like 2.2cc in six minuts at 2k rpm. (don't quote me on that, check the FSM)
It it is performing in spec there is no need to premix.
Like said above, bubbles are normal.
It sould flow something like 2.2cc in six minuts at 2k rpm. (don't quote me on that, check the FSM)
It it is performing in spec there is no need to premix.
Like said above, bubbles are normal.
07-02-06, 05:23 PM
#5
Too old to act my age
Join Date: Feb 2005
Location: Tulsa, Ok.
Posts: 3,164
Likes: 0
Received 0 Likes
on
0 Posts
As said, as long as the OMP is outputting the correct amount, you don't NEED to premix. I have the stock OMP hooked up, and working correctly, yet I still add 1/2oz per gallon of 2 stroke oil. I look at it as a safety measure.
Thread
Thread Starter
Forum
Replies
Last Post
troym55
3rd Generation Specific (1993-2002)
23
05-25-16 12:42 PM
Nosferatu
2nd Generation Specific (1986-1992)
7
09-05-15 02:13 PM