? on Power pulse assembly from racing beat
06-22-06, 02:04 PM
#1
Full Member
Thread Starter
iTrader: (1)
Join Date: Jun 2006
Location: arvada co
Posts: 117
Likes: 0
Received 0 Likes
on
0 Posts
? on Power pulse assembly from racing beat
well i'm a newb to the car.........carbs and rotaries........anyway
this carbeurator has plenty of hoses coming out of it, and i dont know where to begin. i'm assuming i have to remove all smog control hoses and parts, which i plan on doing once i pass my emissions. of course there isnt any instructions for noobtards, so any help or pointers would be greatly appreciated.
edit: this is on my 79 12a........and is does removing the rats nest include taking off the carb heating hose?
this carbeurator has plenty of hoses coming out of it, and i dont know where to begin. i'm assuming i have to remove all smog control hoses and parts, which i plan on doing once i pass my emissions. of course there isnt any instructions for noobtards, so any help or pointers would be greatly appreciated.
edit: this is on my 79 12a........and is does removing the rats nest include taking off the carb heating hose?
Last edited by zlyricist; 06-22-06 at 02:16 PM.
06-22-06, 02:11 PM
#2
You will want to remove the "rats nest". That is all the vacuum lines and solenoids. The how-to is here: http://www.ten15.net/Maz.tutorials/ You can find the link in the 1st gen FAQ.
06-22-06, 05:59 PM
#3
Rotary Enthusiast
thats a good tutorial IF you have an FB. The 79 and 80 emission control equipment is different. There's a semi- turorial like thing in the archives for info on how to remove it from a SA. Check it out.
Thread
Thread Starter
Forum
Replies
Last Post
thecody59
1st Generation Specific (1979-1985)
40
08-23-15 06:41 PM