power loss and throttle stuck
11-07-07, 02:49 PM
#1
Junior Member
Thread Starter
Join Date: Aug 2007
Location: nj
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
power loss and throttle stuck
Hello every one i recently put up racing beat's cat eliminator pipe put the egr block plate on a capt an disconected the hose from the egr to the black vacum lines in center of motor. Well basically from 3000 to 5000 there is no power at all it creps but once in awhile it will kick n start gunning it but my gass pedal wont come back i have tightend canles for slack n lubd them any help would be great
11-08-07, 06:05 PM
#3
Junior Member
Thread Starter
Join Date: Aug 2007
Location: nj
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
thnx alot ken u were dead on the cable was off of it i ript it it spun up very well but throttle still got stuck if i adjust thats cable to make the spring tighter will that help with this problem or do i look elsewere
11-09-07, 11:42 AM
#4
Lives on the Forum
Hmm, not really sure why the throttle would be sticking. Make sure the oil feed lines are not interfering with the linkage at the front of the carb. Does it still stick when moving the linkage by hand, or only with the gas pedal (maybe bad cable or cable routing)?
Thread
Thread Starter
Forum
Replies
Last Post
LunchboxSA22
2nd Generation Specific (1986-1992)
37
10-26-15 10:53 AM
Frisky Arab
2nd Generation Specific (1986-1992)
13
08-18-15 05:30 PM