|
1st gen MR2 fans (work great!)
2nd gen alloy water pump housing (the original cast iron weighs a ton and a half) 2nd gen aluminum water pump Direct fire ignition Can't think of anything else at the moment... :) . |
2nd gen FMOC
2nd gen clutch hose S4 alt Thats about it. More to come down the road. |
I have a coil over conversion kit (well at least the adjustable perches) for a Miata on both my street RX-7 and a my rallyx-7.
|
gr8 thread:
FD alt FC strut tower brace (no need for a write up all you do is oval out the holes...) FC coil with my mallory directfire Miata short shifter and shift knob. FC seats FC fuseable links in FB holder. |
FC front suspension, steering, and brakes
FC E-brake handle Miata Springs Miata front struts on rear S5 engine FC FMOC Honda projector headlights |
Originally Posted by Hyper4mance2k
(Post 8941045)
FC fuseable links in FB holder.
|
Ford Taurus electric fan
|
ok
-engine--------------------------------->mazda rx7 91'fc s5 -trans----------------------------------->mazda rx7 91' fc s5 -fuse block----------------------------->mazda rx7 fc -coils------------------------------------>mazda rx7 fc -msd spark pluss wires-------------->mazda rx7 fc -engine harness---------------------->mazda rx7 fc s5 -hood scoup--------------------------->mazda rx7 fc -window master switch-------------->mazda rx7 fc -apexi ecu------------------------------>mazda rx7 fc -indiglo gauges------------------------>mazda 85 gslse -fuel filter-------------------------------->subaru impreza -fuel pump------------------------------>porsche 911 -short shift------------------------------>mazda miata -shit knob illuminated----------------->mazda rx8 -seats------------------------------------>mazda rx8 -front brakes and rotors-------------->mazda rx8 -strut bar-------------------------------->mazda rx7 fd -uper manifold-------------------------->mazda rx7 fd -alternator------------------------------>mazda rx7 fd -front bumper lights------------------->mazda rx7 fd 99'spec -front bumper--------------------------->ford focus -rear bumper---------------------------->honda s2000(half)+subaru impreza(half) -side skirts------------------------------->honda s2000 -half rear fenders----------------------->honda s2000 -trank lid---------------------------------->honda s2000 -rear tailights---------------------------->honda s2000 -rear stop light-------------------------->honda s2000 -start button----------------------------->honda s2000 -fuel door--------------------------------->ford f150 -f1 carbon mirrors----------------------->honda nsx -horn button----------------------------->mazda rx7 fd ''type r'' -emblems and stickers----------------->mazda rx7 fd ''type r'' -front lights------------------------------>nissan 200sx i'm sure i did forget something...will add it later...:scratch: |
Haha Nikoe, I'm not sure if your car is even still an FB at all.. :D
|
Sounds like it's a Mazdondabaru RX789112000sxs....
Johnny Cash; "One Piece at a Time": Well, I left Kentucky back in '49 An' went to Detroit workin' on a 'sembly line The first year they had me puttin' wheels on cadillacs Every day I'd watch them beauties roll by And sometimes I'd hang my head and cry 'Cause I always wanted me one that was long and black. One day I devised myself a plan That should be the envy of most any man I'd sneak it out of there in a lunchbox in my hand Now gettin' caught meant gettin' fired But I figured I'd have it all by the time I retired I'd have me a car worth at least a hundred grand. [CHORUS] I'd get it one piece at a time And it wouldn't cost me a dime You'll know it's me when I come through your town I'm gonna ride around in style I'm gonna drive everybody wild 'Cause I'll have the only one there is around. So the very next day when I punched in With my big lunchbox and with help from my friends I left that day with a lunch box full of gears Now, I never considered myself a thief GM wouldn't miss just one little piece Especially if I strung it out over several years. The first day I got me a fuel pump And the next day I got me an engine and a trunk Then I got me a transmission and all of the chrome The little things I could get in my big lunchbox Like nuts, an' bolts, and all four shocks But the big stuff we snuck out in my buddy's mobile home. Now, up to now my plan went all right 'Til we tried to put it all together one night And that's when we noticed that something was definitely wrong. The transmission was a '53 And the motor turned out to be a '73 And when we tried to put in the bolts all the holes were gone. So we drilled it out so that it would fit And with a little bit of help with an A-daptor kit We had that engine runnin' just like a song Now the headlights' was another sight We had two on the left and one on the right But when we pulled out the switch all three of 'em come on. The back end looked kinda funny too But we put it together and when we got thru Well, that's when we noticed that we only had one tail-fin About that time my wife walked out And I could see in her eyes that she had her doubts But she opened the door and said "Honey, take me for a spin." So we drove up town just to get the tags And I headed her right on down main drag I could hear everybody laughin' for blocks around But up there at the court house they didn't laugh 'Cause to type it up it took the whole staff And when they got through the title weighed sixty pounds. [CHORUS] I got it one piece at a time And it didn't cost me a dime You'll know it's me when I come through your town I'm gonna ride around in style I'm gonna drive everybody wild 'Cause I'll have the only one there is around. [Spoken] Ugh! Yow, RED RYDER This is the COTTON MOUTH In the PSYCHO-BILLY CADILLAC Come on Huh, This is the COTTON MOUTH And negatory on the cost of this mow-chine there RED RYDER You might say I went right up to the factory And picked it up, it's cheaper that way Ugh!, what model is it? |
Wow, lots of mods and parts from other cars. But where's the pics?
|
Hey-- We really do need a wiki. Some of these swaps are bolt-off, bolt-on, whereas others (taurus fan, points-swap-out and the rear end conversion for example) are not quite so... easy to do.
What are the chances of a hosted wiki? |
I am waiting for the Renesis swap. Who has done that? Thinking about it, but I want to hear horror stories first.
|
I can host up a wiki if needed, I'll grab the mediaWiki code and put it on my servers. Be a nice way to manage all the information here.
|
I just think it would be a nice way to properly host mods, how-tos and pics for those mods-- Linking to threads is a crappy way to get your FAQ fix on.
|
its been done..dont know by who..but i came across these picture's and saved them..
http://img169.imageshack.us/img169/1326/fb3s.jpg http://img36.imageshack.us/img36/5514/renesis.jpg http://img169.imageshack.us/img169/6656/renesis2.jpg http://img169.imageshack.us/img169/4...dairintake.jpg http://img159.imageshack.us/img159/8...ugecluster.jpg this is wild..they even put a 8 cluster in the FB..!! :AA:
Originally Posted by mikeric
(Post 9371800)
I am waiting for the Renesis swap. Who has done that? Thinking about it, but I want to hear horror stories first.
|
S5 Shifter and Knob
MX3 Steering Wheel FC Sub Frame Miata Stereo Head Unit |
Yamaha Razz/Riva oil tank
|
I'm looking to put in a second gen fuse box in my FB, but I cant find the right size quick disconnects. anyone know what size I need and where do I find them? BTW the whole reason I wanted to do the FC fuse box was because I couldn't find the right size quick disconnects that look to be the same size. I can get fusible link wires all day long for about 5 bucks a foot.
I have a S4 Alt, 2g leading coil, miata short shift, apex'i muffler from my old lancer. I still need to install the FC oil cooler, and fuse box.` |
Convert your fusible links into a beautiful fuse box. Simply take out the wires/links and install Bussmann fusible link fuses (FLF-20--for the 20 amp). They are nice looking, clear, (so you can see inside), and best of all----they plug right in! No mods, no fuss. Your fusible link block will look awesome with all the different color fuses, like a real fuse panel. Someone on the forum gave me this idea.
Mike |
13b engine, rad and oil cooler from a 74 rx4, s4 w/p housing and pump, e-fan from a 92 mitzubishi gallant.
|
Originally Posted by mjm4jc
(Post 9375955)
Convert your fusible links into a beautiful fuse box. Simply A the wires/links and install Bussmann fusible link fuses (FLF-20--for the 20 amp). They are nice looking, clear, (so you can see inside), and best of all----they plug right in! No mods, no fuss. Your fusible link block will look awesome with all the different color fuses, like a real fuse panel. Someone on the forum gave me this idea.
Mike That didn't work for me. I've tried it. I wiggled it I got no power. I've already bought the part and made the bracket to mount it. I just need the connectors |
I got a small block chevy 355, a chevy th350 trans, and a ford 8.8 rear end in mine.:)
|
Anyone had this actually work?
|
In my GSL-SE:
S4 13b engine S4 ECU S4 gearbox w/ s3 tail shaft My S4 13B swap write up. https://www.rx7club.com/1st-generation-specific-1979-1985-18/1984-gsl-se-s4-13b-project-832622/ |
| All times are GMT -5. The time now is 08:19 PM. |
© 2024 MH Sub I, LLC dba Internet Brands