i have a regular jensen am/fm/cass. player, also is the factory equalizer. i found the ant. wire, and the hook up for the adapter. now, i notice 2 black what looks like coaxle cables connected, and 2 white ones connected. i have a white cable with male ends and a black one with male ends,where do these go? i know that they deal with the equalizer but i cant find where they connect to. appreciate any help on this matter. thanks

 

I vaguely remember those I think they have something to do with the joy stick jobby on the console look on the EQ and the radio deck Hope that helps some

 

yea i looked on the eq, no place to connect, same with the radio,(not stock) guess ill hook it up and see what happens

 

those black and white things are the car "harness" if you will call it that, if your puttin in a new stereo your going to have to cut them and splice into them or run new wires to each of your speakers, and a new power and ground, and ignition. if you need more help just post another message.

 

Do a search... there's lots of posts about the stock wiring...

 

did do a search, i did not find anything useful, if it would have explained about the 2 wires in question i would not have asked. sorry if that sounds kind of smartass but i have had 90% of my problems solved just doing searches. here and the mustang & jeep forums. anyway pulled the eq out and threw it in the junk pile and we just hard wired the radio in and ran new speaker wire. but thanks anyway.

 

thats the way to do it

 

https://www.rx7club.com/showthread.p...=stereo+wiring

 

that helped alot to understand what wires are for what. appreciate that.i believe we are going to totally re-vamp the system this weekend. i.e new speakers,amp and cd player/tuner. be the best bet for the money in the long run. appreciate the help smnc.

 

No problem...