New Radiator Fan Set Up
#1
Full Member
Thread Starter
Join Date: May 2005
Location: Newport, Rhode Island
Posts: 229
Likes: 0
Received 0 Likes
on
0 Posts
New Radiator Fan Set Up
I plan on adding an electric cooling fan set up , for my Rx7, before this summer. I would also like to find an aluminum radiator fan like my 83' bridgeported Rx7 had (look at the picture below), but I have no idea where to find one. Does anyone know where I can find an aftermarket metal or aluminum radiator fan?
#2
Most parts stores should have universal fan kits. They usually won't fit the stock fan clutch but you can get some that flex with rpm although they usually don't cool as well as the stock setup.
#3
Senior Member
Join Date: Dec 2005
Location: New Hampshire
Posts: 613
Likes: 0
Received 0 Likes
on
0 Posts
black magic 180 best fiding one for fb www.summitracing.com
#5
Full Member
Thread Starter
Join Date: May 2005
Location: Newport, Rhode Island
Posts: 229
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Kill No Cone
Many folks have been using a elect fan from a 6 cyc. junk yard Taurus.
Run a search and you will see.
Run a search and you will see.
Last edited by Rxcalibur; 01-28-06 at 11:48 PM.
#6
Lives on the Forum
I'm using a set of fans from an '80s MR2. I started out using both, but when I changed to the 2nd gen radiator I had some issues mounting them again. Now I'm only using one, but it still keeps things very cool. Mounting both fans on a stock 1st gen radiator is a breeze, took like five minutes to do. Total cost (including the fan controller) was under 40 bucks. Do a search for MR2 and you'll come up with all of the info that you could ever want.