New guy here....82 Rx sitting for ALONG TIME!
#1
Newbie
Thread Starter
Join Date: Jul 2008
Location: Grand Falls-Windsor, NL, Canada
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
New guy here....82 Rx sitting for ALONG TIME!
My brother has a 82 rx7. It has been sitting for ALONG time....to the tune of 10 plus years. I plan on taking it and making it back into the car is should be. In order to fire up the motor, what needs to be done. I know the trans was bad, but as far as I know, the motor at the time of outdoor storage was fine.
shes in rough shape atm but I plan on rebuilding it...new interior, widebody, suspension, upgraded brakes, some power adders.....maybe a 13b turbo. I am handy with a wrench, I modded LOTS of cars, worked on a alcohol injected civic etc.
just not up on rotorays.....I have a 2007 mazda 5 in the stable as well...
thanks for the guidance!
shes in rough shape atm but I plan on rebuilding it...new interior, widebody, suspension, upgraded brakes, some power adders.....maybe a 13b turbo. I am handy with a wrench, I modded LOTS of cars, worked on a alcohol injected civic etc.
just not up on rotorays.....I have a 2007 mazda 5 in the stable as well...
thanks for the guidance!
#2
weak minds wear the crown
iTrader: (2)
welcome to the forum, as a usual tip, hit the FAQ page, and use the search function of the forum...now, to get it started it's not different than any car, you know just do the usual, renew all fluids as well as plugs and wires, make sure no wires are corroded (specially around battery cables and stuff) change filters, i recommend before trying to turn it, to squirt some MMO or seafoam into the chambers (sorry, i meant into the housings through the spark plug holes, like Fordsucks2 said :P)give it that bit of lube since it has sit for a long time and it's probably dried out, and the seals are probably a bit stuck i'm sure, get the seals nice and soaked, and then fire her up. make sure no hoses are broken or brittle, specially the oil feed lines.
Last edited by blackdeath647; 07-11-08 at 08:28 PM.
#3
I have an 80 RX7 that was sitting since 1992. I did some research and found out that pouring marvel mystery oil into the spark plug holes, a sort of "priming" is help in getting old rotarys to fire up..successfully. When I did mine, I changed the oil, poured the marvel mystery oil in (not filling them up, but a liberal amount), with fresh spark plugs and it took two attempts before she started up. I am still rolling on the same engine with no problems.
I'm sure some of the pros in this forum have something to add, I hope this helps.
I'm sure some of the pros in this forum have something to add, I hope this helps.
#5
Newbie
Thread Starter
Join Date: Jul 2008
Location: Grand Falls-Windsor, NL, Canada
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Ok,
Sounds like I should get it going then. as long as everything is sorted. I do not have access to seafoam. is there anything similar I can use thats easily available through most outlets? I hope to have it going by the time hes back onshore in 4 wks. I would love to see his face when I drive up to his house in it.
Sounds like I should get it going then. as long as everything is sorted. I do not have access to seafoam. is there anything similar I can use thats easily available through most outlets? I hope to have it going by the time hes back onshore in 4 wks. I would love to see his face when I drive up to his house in it.
Trending Topics
#8
Newbie
Thread Starter
Join Date: Jul 2008
Location: Grand Falls-Windsor, NL, Canada
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
MMO is available where I live! thanks guys...next question since i have some peoples attention....how to unseize brakes. They are LOCKED on. what can I do to get them free so I can tow the car to my house.
I have new wheels and front and rear Jdm body parts for my mazda 5 ordered too. can't wait to get all that on! yah...mazdas are awsome. im getting hooked on the rotarys now. hopin to have an 1st and 2nd gen RX turbo, plus an auto RX8 as well...
I have new wheels and front and rear Jdm body parts for my mazda 5 ordered too. can't wait to get all that on! yah...mazdas are awsome. im getting hooked on the rotarys now. hopin to have an 1st and 2nd gen RX turbo, plus an auto RX8 as well...
#9
I got a Rotary Engineering engine from a friend who had not started it since 1985 (this was last spring). I had him pour MMO through every hole he could find; intake, spark plug, and exhaust and let it sit for a week. With the plugs out it turned over with an 8" wrench on the flywheel pulley. I put it into a second gen. and have put nearly 10K miles on it as my DD. MMO also helped me store a 79 for almost eleven years with no damage to the engine rotors, housings, or seals --- GREAT Stuff!
Thread
Thread Starter
Forum
Replies
Last Post
sherff
Adaptronic Engine Mgmt - AUS
9
02-24-19 12:09 PM