1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

Needing INTERIOR PIECES!

Thread Tools
 
Search this Thread
 
Old May 16, 2005 | 11:33 PM
  #1  
Eriks85Rx7's Avatar
Thread Starter
Wheel Revolutionist!
Tenured Member 05 Years
 
Joined: Apr 2005
Posts: 1,018
Likes: 1
From: West Virginia
Needing INTERIOR PIECES!

Does anyone have these plastic pieces:
Color is Red

The back two plastic pieces that cover the speakers in my car a extremely faded and Victoria British doesnt carry them does anyone have one? Also When trying to get the signal control center my dad busted the plastic covering around the steering wheel column it.

Does anyone have any of these in preferably Red or black or some color that can match with a red interior. If you any of you do and are willing to sell it or something please let me know and will work things out with my dad. Thanks in advance
Reply
Old May 17, 2005 | 01:30 AM
  #2  
burners85gsl-se's Avatar
Full Member
Tenured Member 05 Years
 
Joined: May 2005
Posts: 53
Likes: 0
From: las cruces ,nm
Is the colomn the same as a 83? If so than i have a spare.
Reply
Old May 17, 2005 | 01:39 AM
  #3  
Rx-7Doctor's Avatar
Lives on the Forum
Tenured Member 10 Years
iTrader: (13)
 
Joined: Jul 2004
Posts: 10,584
Likes: 12
From: Oregon
Interior pieces

As far as the rear speaker covers. the best thing to do you is repaint them with dupli-color
plastic spray. They are the most faded portion of the trim due to their location.
Reply
Old May 17, 2005 | 01:42 AM
  #4  
IanS's Avatar
Ricer
Tenured Member 15 Years
iTrader: (4)
 
Joined: Jun 2004
Posts: 4,424
Likes: 1
From: Washington, Iowa
I have the steering column cover in red and gray. One of them is broken. I think its the gray one. I will check and get back to you

-Ian
Reply
Old May 17, 2005 | 01:43 AM
  #5  
Rx-7Doctor's Avatar
Lives on the Forum
Tenured Member 10 Years
iTrader: (13)
 
Joined: Jul 2004
Posts: 10,584
Likes: 12
From: Oregon
Thumbs up Column trim

84-85 are all by themselves. You can still get them thru mazdatrix for around $60.00 for top and bottom pieces together or buy seperate. Dealer may be cheaper. Also might want to put in the appropriate section which is the 1st gen for sale/wanted section.
Reply
Old May 17, 2005 | 02:01 AM
  #6  
trochoid's Avatar
Old Fart Young at Heart
Tenured Member 10 Years
iTrader: (6)
 
Joined: Apr 2004
Posts: 15,145
Likes: 8
From: St Joe MO
If you want everything to match, take several pieces to your local autobody paint store. Have them match the paint for color and gloss. Less than a quart, and you can paint the entire interior hard parts, including the dash, if you want.

SEM paint is the best for this. They have paint specifically formulated for hard and soft plastics . I tried the Dupli-color Plastic Coat and found it too glossy. Every single flaw, scrape, etc. in the plastic showed even more than before. The SEM paint, with it's ability to adjust gloss, gives a much better finished look.

For about $100, includung paint, paint prep and a cheap touch up gun, you can re-do your entire interior, in any color you want.
Reply
Old May 17, 2005 | 09:38 PM
  #7  
Whanrow's Avatar
Certified Old Fart
Tenured Member 10 Years
 
Joined: Oct 2004
Posts: 490
Likes: 0
From: Inkerman, On, South of Ottawa, the 2nd coldest Capital in the World
Steering column cover

I just bought a new one from Mazda. They were in stock in the Cdn warehouse, and no doubt there will be more in the US warehouse.

Bottom peice is $20 Cdn
Top peice is $34 Cdn

Part numbers are

FA54-60-221-10
FA54-60-230-10

Note the -10 is colour code for burgandy. There are different codes for each colour.
Reply




All times are GMT -5. The time now is 02:18 AM.