vipergts_3

iTrader: (9)

i need pictures of the engine bay looking at the firewall of a gsl-se not gs or gsl...
preferably without the motor. need to see where brake lines and fuel lines as well as wiring. knew i should have taken pics when i cut up the last one but noooooo....

mazdaverx713b

iTrader: (91)

i've got some older and newer pics of my setup and was thinking maybe these will help:

vipergts_3

iTrader: (9)

thats cool, nice and clean. i will need to refrence these pics lol, any chance you can get a closer shot of the fuel lines? need to see that area so i can run all the plumbing correctly.

mazdaverx713b

iTrader: (91)

i can do that. the only catch is that the was originally a GS. i restored the car and used all oem parts when switching to an SE setup. the only thing not original to the SE is the fuel feed line. i used aluminum fuel line and custom bent it from the filter forward. if you need pics of that for reference i can do that.

vipergts_3

iTrader: (9)

that would be perfect, its exactly what i am going to be doing. want to do my homework lol.

mazdaverx713b

iTrader: (91)

ok, sounds good. i'll post the ones i have already loaded from when the car was being restored tonight and get more tomorrow and if you need more specifics i can jack the car up and take any pics you might need:

vipergts_3

iTrader: (9)

nice... what did you use for the undercoating ? i saw your other post about the gas tank... i think i have another i am putting back together besides the conversion. sheesh the wife is going to kill me if i dotn finish these cars hahah
thank you for the pictures