Need help with electrical terminology / adding connections
#1
Senior Member
Thread Starter
Join Date: Jul 2013
Location: South Beach
Posts: 303
Likes: 0
Received 0 Likes
on
0 Posts
Need help with electrical terminology / adding connections
Trying to figure out how to google this to begin with...
I am trying to add a new connection to the fuse box for an AFR gauge and aftermarket electric choke, without cutting into a power to something else. Both needs to be a 12V keyed power source, and I assume a 15A fuse would do the trick.
Anyone can please help me with the terminology or a thread of someone doing this?
I am trying to add a new connection to the fuse box for an AFR gauge and aftermarket electric choke, without cutting into a power to something else. Both needs to be a 12V keyed power source, and I assume a 15A fuse would do the trick.
Anyone can please help me with the terminology or a thread of someone doing this?
#2
Senior Member
Thread Starter
Join Date: Jul 2013
Location: South Beach
Posts: 303
Likes: 0
Received 0 Likes
on
0 Posts
Decided to use the wiring for the AC compressor as a 12V source, couldn't find any info via google or the search on how many volts the AC compressor has. It seems to be a keyed power source from what I can figure, but the choke does got very hot. Not as hot as the engine, but as hot as the aftermarket fuel pump.
Thread
Thread Starter
Forum
Replies
Last Post
SamNewey
New Member RX-7 Technical
3
05-07-16 01:10 PM
fc3steve
2nd Generation Specific (1986-1992)
4
04-27-16 05:24 PM
Mandalorian831
General Rotary Tech Support
0
04-23-16 10:16 AM