I need a little help with my carb and tuning it.

I have a stock 12a with a Dellorto card from Racing Beat and a Lake Cities manifold. The carb is jetted the way it left RB. Which I belive is for a 13B with the RB Manifold. I know that I have to change to smaller chokes because of the manifold but I don't know what size or what jets to use.

If there is anyone that is running a stock 12A with a Dellorto and a LC manifold or has had this setup could you please let me know where to start with the jetting and any other tunning info you might be able to help me with. Also if there are any good places to buy parts (jets and chokes) could you let me know.

Thanks

Jim

 

Heres what your looking for
http://www.gruntled.com/Dellorto/

 

Serzy,

Thanks for the sit, I had looked at it before I posted the question here. It was helpfull but didn't have the information I was looking for.

 

Well, I'm afraid I can't really help you specifically there. However, I was thinking, if worse comes to worse and you are unable to get the answers you need, you may try emailing Racing Beat's tech support. They are usually really good about supporting the products they sell, and I would bet they could give you some general guidelines...