My s1 (sa22c) Rx7 Australian car
09-19-06, 02:00 AM
#1
Full Member
Thread Starter
Join Date: Oct 2005
Location: urf
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
My s1 (sa22c) Rx7 Australian car
http://video.google.com/videoplay?do...06042974451103
Got bored today and had uni work to do... so that means procrastination.
So I decided to make a short video on my car. It's actualy running half decent for hte first time in about 3-4 months.
Mods are as follows at the time of the video:
Series 3 12a extend port rebuilt by extreme rotaries 26,000km ago,
Stuber modified niki carb with mechanical secondaries (http://rotor.rxperformance.com.au/),
S2 electronic distributer regraphed at Extreme rotaries,
Exedy Heavy duty clutch,
Perry short extractors, 2 mufflers and a hot dog + 2.5" exhaust,
Removed air pump,
Dual electric thermo fans (removed clutch fan),
Lightened Flywheel,
Carter High Volume fuel pump,
Fuel pressure regulator,
Sloted brake rotors and rebuilt calipers,
S2 disk rear end,
4.4:1 Differential,
Kings low springs and pedders sport comfort shocks,
Urethane bushes,
Solex door locks,
Nova steering wheel with s1 horn cover,
S5 Rx7 turbo 2 seats,
10,000 rpm shift tacho embedded into dash cluster,
Front strut brace Rx4 oil cooler,
Long wheel stud conversion,
15" x 6.5" Performance rims,
30% window tint,
Got bored today and had uni work to do... so that means procrastination.
So I decided to make a short video on my car. It's actualy running half decent for hte first time in about 3-4 months.
Mods are as follows at the time of the video:
Series 3 12a extend port rebuilt by extreme rotaries 26,000km ago,
Stuber modified niki carb with mechanical secondaries (http://rotor.rxperformance.com.au/),
S2 electronic distributer regraphed at Extreme rotaries,
Exedy Heavy duty clutch,
Perry short extractors, 2 mufflers and a hot dog + 2.5" exhaust,
Removed air pump,
Dual electric thermo fans (removed clutch fan),
Lightened Flywheel,
Carter High Volume fuel pump,
Fuel pressure regulator,
Sloted brake rotors and rebuilt calipers,
S2 disk rear end,
4.4:1 Differential,
Kings low springs and pedders sport comfort shocks,
Urethane bushes,
Solex door locks,
Nova steering wheel with s1 horn cover,
S5 Rx7 turbo 2 seats,
10,000 rpm shift tacho embedded into dash cluster,
Front strut brace Rx4 oil cooler,
Long wheel stud conversion,
15" x 6.5" Performance rims,
30% window tint,
Very nice ride man, you can tell a lot of work has gone into it.
Thread
Thread Starter
Forum
Replies
Last Post
KAL797
Test Area 51
0
08-11-15 03:47 PM
