1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

Logicon testing?

Thread Tools
 
Search this Thread
 
Old Jun 19, 2005 | 09:15 AM
  #1  
Bteets9914's Avatar
Thread Starter
Full Member
Tenured Member 10 Years
iTrader: (6)
 
Joined: May 2003
Posts: 222
Likes: 0
From: Saint Louis, MO
Logicon testing?

well i am slowing narrowing down all of the problems in my car....

The next problem is that when buttons are pressed on the logicon the motor doesn't change the vents at all, doesn't matter what button is pressed.

any idea on how to test the Logicon unit or the motor to figure out which one is not working??

Thanks,
Bryan
Reply
Old Jun 21, 2005 | 11:14 AM
  #2  
Bteets9914's Avatar
Thread Starter
Full Member
Tenured Member 10 Years
iTrader: (6)
 
Joined: May 2003
Posts: 222
Likes: 0
From: Saint Louis, MO
bump...
Reply
Old Jun 21, 2005 | 03:17 PM
  #3  
trochoid's Avatar
Old Fart Young at Heart
Tenured Member 10 Years
iTrader: (6)
 
Joined: Apr 2004
Posts: 15,145
Likes: 8
From: St Joe MO
Finding a used replacement is probably less work. Have no idea how to go about testing, unless it is in the FSM.
Reply
Old Jun 21, 2005 | 03:20 PM
  #4  
gsl-se addict's Avatar
Super Moderator
Tenured Member 15 Years
iTrader: (3)
 
Joined: Jan 2003
Posts: 5,088
Likes: 11
From: Lynchburg, VA
What does it do? Does it make strage noises or anything when you try to change the vents? Does the blower work?
Reply
Old Jun 21, 2005 | 03:31 PM
  #5  
Bteets9914's Avatar
Thread Starter
Full Member
Tenured Member 10 Years
iTrader: (6)
 
Joined: May 2003
Posts: 222
Likes: 0
From: Saint Louis, MO
The blower works fine, and the temp changes also. when i press any buttons the light changes to the button i have depressed, but there are no noises and the flap never moves. Pretty much all i can say about it, that's why i was kinda thinking that the motor which changes the flap is dead...
Bryan
Reply
Old Dec 5, 2005 | 06:02 PM
  #6  
Bteets9914's Avatar
Thread Starter
Full Member
Tenured Member 10 Years
iTrader: (6)
 
Joined: May 2003
Posts: 222
Likes: 0
From: Saint Louis, MO
have to revisit this thread, i bought a second vent motor and also another logicon, but haven't had the time to put it in yet. I noticed this weekend that the fresh air/recirc motor doen't move the flap over by the blower motor when pressed also. Last the radio comes on display and also clicks, but no sound, could all three of these be related? checked the fuses, except the a/c fuse, i'll check that when i get to the car again.
Anyone have any ideas?
thanks,
Bryan
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jmolina0163
1st Generation Specific (1979-1985)
19
Sep 25, 2015 06:06 PM
Mps_hell
Adaptronic Engine Mgmt - AUS
3
Sep 19, 2015 10:02 PM




All times are GMT -5. The time now is 10:06 AM.