can someone tell where the PVC is located? so i can change it
thanks

 

@ home depot. it would be called a PCV not pvc. dont thing we have then. it would be a valve in the valve cover to the carb. we have a line with no valve from the oil neck to the carb

 

Mine has one. It screws into the intake manifold. I dunno, maybe the evaporative system on the Aussie models is different?

 

the us models have a hose on the intake but thats for vacume... runs over to the brakes

 

I know what the brake booster line is. The PCV screws into a bung on the manifold next to all the little vacuum nipples. The way it's setup is the vapour line from the fuel tank goes into a tee piece from which a line goes to the PCV and the other goes to the nipple on the centre plate next to the oil filler neck. The line from the filler neck usually goes to the charcoal canister but on mine it goes into one of those little K&N filters. Must work since I've never had any condensation build up in the filler neck.