A little help?
05-25-08, 07:16 PM
#1
Full Member
Thread Starter
Join Date: Nov 2006
Location: New Brunswick, Canada
Posts: 187
Likes: 0
Received 0 Likes
on
0 Posts
A little help?
Okay so I just put my S5 13BT back together today. I am using a GSL SE oil pan and fron cover and have 2 questions. First, do I use the S5 dip stick or the GSL-SE dipstick? Second question is about the oil drain line for the turbo. Where is the best place to tap a hole for the drain? I found a spot on the front cover that looks like I could make it work but I am curious as to what others have done. Any help is apprectiated, Thanks in advance.
05-25-08, 09:19 PM
#4
Full Member
Join Date: Mar 2008
Location: Roseburg, Oregon
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
05-25-08, 09:41 PM
#5
84stock may be correct.
The determining factor is the center iron on the engine. Whether the height of the boss where the dip stick seats on the S5 TII iron is taller than the SE center iron.
I'm sure someone will chime in to give the absolute here. :-)
The determining factor is the center iron on the engine. Whether the height of the boss where the dip stick seats on the S5 TII iron is taller than the SE center iron.
I'm sure someone will chime in to give the absolute here. :-)
05-29-08, 01:09 PM
#7
Full Member
Thread Starter
Join Date: Nov 2006
Location: New Brunswick, Canada
Posts: 187
Likes: 0
Received 0 Likes
on
0 Posts
anyone with a solid answer? I have the T2 dipstick but if I need to use the 85 dipstick then I have to start searching for one, so I need to figure this out asap. Thanks for the info so far guys.