just installed my new shift boot from redlinegoods.com LOOK!!!
Thread Starter
Rotary Freak
Joined: Sep 2004
Posts: 1,901
Likes: 0
From: Kitchener, Ont. Canada
just installed my new shift boot from redlinegoods.com LOOK!!!
well, its been a while, but my car finally arrived a couple days ago, as some of you know, and i just finished installing the boot from redlinegoods.com that i got some time ago. let me know what you think!!! i must say, that it definately makes the interior look way more classy than the stupid ugly rubber poor excuse for a shift boot that mazda decided to put in the fb
as of now, they are available, so go get one already!!!
i also decided to get his e brake boot, that should look pretty sweet too.
nick
as of now, they are available, so go get one already!!!
i also decided to get his e brake boot, that should look pretty sweet too.
nick
Last edited by nick1; Mar 8, 2005 at 06:23 PM.
Everyone,
Nick was nice enough to make the pictures a link to our site where you can order the boots. Yes, bootS - because we've got a positive that the FC ebrake boot will fit the FB as well, so we can offer both.
If you need the link again, here it is: http://www.redlinegoods.com/FBproduct.shtm
Thank you!
Maciek
Nick was nice enough to make the pictures a link to our site where you can order the boots. Yes, bootS - because we've got a positive that the FC ebrake boot will fit the FB as well, so we can offer both.
If you need the link again, here it is: http://www.redlinegoods.com/FBproduct.shtm
Thank you!
Maciek
Trending Topics
Thread Starter
Rotary Freak
Joined: Sep 2004
Posts: 1,901
Likes: 0
From: Kitchener, Ont. Canada
now i just need a nice silver, or gunemetal shift ****. what i want is one that will slip really far over the shifter, so that it appears that i have a shorter shifter. u know? instead of the threads on the shift **** being at the bottom, making it sit really high up, i'd rather slip one right over, so the shifter practicly hits the top of the shift **** (on the inside). understand? or am i just wacked?
nick
nick
Rockn' The Galant
Joined: Jan 2005
Posts: 1,901
Likes: 0
From: Shreveport, LA
Also just ordered a new momo ****, hell, I went all out tonight, I hate having money! 
http://www.cardomain.com/item/MOMALUAIR
This will fit right?
- Tech
http://www.cardomain.com/item/MOMALUAIR
This will fit right?
- Tech
Thread Starter
Rotary Freak
Joined: Sep 2004
Posts: 1,901
Likes: 0
From: Kitchener, Ont. Canada
Originally Posted by Tech_Greek
Also just ordered a new momo ****, hell, I went all out tonight, I hate having money!
http://www.cardomain.com/item/MOMALUAIR
This will fit right?
- Tech
http://www.cardomain.com/item/MOMALUAIR
This will fit right?
- Tech
personally, this time around i wanna go with the skinny type ****, instead of the blunt round type. everyone needs a change no and then!
Rockn' The Galant
Joined: Jan 2005
Posts: 1,901
Likes: 0
From: Shreveport, LA
Well,
I work at a local car wash supervising vacuumers and so I pull the 'expensive' cars up (we've had everything from ferraris to lambos) and today I tried a slew of different shifters, the rounds one I felt looked like it would be a little easier to shift and there was one of the long skinny type ones that you talk about and it felt good to a point but unless you have a short shifter with precise shifts it feels like you would mess up a shift if you barely shifted wrong.
- Tech
I work at a local car wash supervising vacuumers and so I pull the 'expensive' cars up (we've had everything from ferraris to lambos) and today I tried a slew of different shifters, the rounds one I felt looked like it would be a little easier to shift and there was one of the long skinny type ones that you talk about and it felt good to a point but unless you have a short shifter with precise shifts it feels like you would mess up a shift if you barely shifted wrong.
- Tech
Wassup!!
Joined: Jul 2001
Posts: 1,081
Likes: 1
From: Longmont Co.
Originally Posted by nick1
now i just need a nice silver, or gunemetal shift ****. what i want is one that will slip really far over the shifter, so that it appears that i have a shorter shifter. u know? instead of the threads on the shift **** being at the bottom, making it sit really high up, i'd rather slip one right over, so the shifter practicly hits the top of the shift **** (on the inside). understand? or am i just wacked?
nick
nick
Originally Posted by nick1
i got mine in just over a week. he is in poland, so its not like overnight or anything. i decided to get the e brake boot too after seeing how cool the shifter boot looks. can't wait either!
http://www.redlinegoods.com/FBisntall.shtm
Take care,
Maciek
Originally Posted by nick1
i got mine in just over a week. he is in poland, so its not like overnight or anything. i decided to get the e brake boot too after seeing how cool the shifter boot looks. can't wait either!
http://www.redlinegoods.com/FBinstall.shtm
Take care,
Maciek
Thread Starter
Rotary Freak
Joined: Sep 2004
Posts: 1,901
Likes: 0
From: Kitchener, Ont. Canada
ya i hear ya....i wish my shifter surround looked better, in fact i wanna do the entire console in carbon fibre overlay at some point, its just not the most important thing on my list of things to do right now.
and yeah, rotor13b, that's the shift **** i want, except i hope i can find one that slips a little further over the shaft to make the shifter appear as though its actually shorter.
nick
and yeah, rotor13b, that's the shift **** i want, except i hope i can find one that slips a little further over the shaft to make the shifter appear as though its actually shorter.
nick