Just got a 15.95 out of my stock* 83!
#1
Senior Member
Thread Starter
Join Date: Apr 2002
Location: Waco, Tx
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
Just got a 15.95 out of my stock* 83!
* has a holley blue fuel pump(4.5psi) and missing exhasut, cat was killing times
went from a 17.2 to a 15.9 by taking exhaust off at the thermal reactor.
ran consisitant 16.2-16.1's all night till the 15.9
was a great time and now to pull the motor out and bridge port it, got the header and 48ida on order, ill let yalls know on the progress.
anyone selling some BP templets?
went from a 17.2 to a 15.9 by taking exhaust off at the thermal reactor.
ran consisitant 16.2-16.1's all night till the 15.9
was a great time and now to pull the motor out and bridge port it, got the header and 48ida on order, ill let yalls know on the progress.
anyone selling some BP templets?
#2
MY NEW NAME IS ROTARY 7S
Join Date: Jun 2002
Location: Cell Block 4 (LOCKDOWN)
Posts: 1,323
Likes: 0
Received 0 Likes
on
0 Posts
I was going to do the same route you was doing by going the cheap way out and buying some ones templates that you dont know if they hacked this **** out of.
If you **** up on a bridge port then you fucked your plate up.The bridge holds the side seals in and if you **** it up then its trashed,,
Spend the money and get it straight from RB..its nice made out out aluminum templates and has holes for the dowl pins to keep the template centered it where it needs to be..
If you **** up on a bridge port then you fucked your plate up.The bridge holds the side seals in and if you **** it up then its trashed,,
Spend the money and get it straight from RB..its nice made out out aluminum templates and has holes for the dowl pins to keep the template centered it where it needs to be..
#3
Open up! Search Warrant!
Join Date: May 2002
Location: Kicking down doors in a neighborhood near you
Posts: 3,838
Likes: 0
Received 2 Likes
on
2 Posts
What was your MPH?
Also, I got a 6 port N/A front end plate from a 86 13B that has a busted water seal support (see pics). It would be great to practice your skills on if you never ported a rotor before. And you can't screw it up! I'll sell it to you cheap. $30 shipped to your door. PM me if interested.
Also, I got a 6 port N/A front end plate from a 86 13B that has a busted water seal support (see pics). It would be great to practice your skills on if you never ported a rotor before. And you can't screw it up! I'll sell it to you cheap. $30 shipped to your door. PM me if interested.
Thread
Thread Starter
Forum
Replies
Last Post
moehler
Single Turbo RX-7's
16
04-25-09 08:59 AM
PFMATT
3rd Generation Specific (1993-2002)
19
05-17-06 02:40 AM