Jacobs FC ignition users?
#1
Full Member
Thread Starter
Join Date: Jan 2003
Location: Orlando, FL
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
Jacobs FC ignition users?
With my FC2000 I have a slight misfire don't know if that is what it is exactly but it feels like it. Anyway I was wondering if others who have used these products experience the same. I cut the wires on mine to be programmed for a 4 cylinder. Is this correct? Maybe my problem. If I run the stock ignition it runs without the misfire feel. It is extremely noticable when holding the throttle at the same rpms for 10 seconds or so. Just revving from 2k to 8k I don't feel it. Any suggestions would be great.
#2
Banned. I got OWNED!!!
Join Date: Mar 2002
Location: Las Vegas, NV
Posts: 4,236
Likes: 0
Received 0 Likes
on
0 Posts
I have the FC1000 with no probs. TII eng with FC coils on mine..
http://www.rotaryheads.com/modifications/FC1000/
http://www.rotaryheads.com/modifications/FC1000/
#3
Full Member
Thread Starter
Join Date: Jan 2003
Location: Orlando, FL
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
Do the FC1000 have the programmable loops on them that you have to cut for 4,6, or 8 cylinder applications? Not finding any info on that link about those Gonzz. I hooked up the box according to this setup http://go.mrgasket.com/AskTechResult...ID=1&ID=122814 but it also mentions nothing about the programmable loops.
Thread
Thread Starter
Forum
Replies
Last Post
ncds_fc
2nd Generation Specific (1986-1992)
19
09-15-15 12:03 AM