Intake Gasket
#1
Senior Member
Thread Starter
Join Date: Mar 2006
Location: Plano, Texas
Posts: 470
Likes: 0
Received 0 Likes
on
0 Posts
Intake Gasket
Anyone know where I can get one cheap? Also the seal things that go on the motor side for the water holse. Would rvt or whatever work for the water seals?
#6
Attack Gas Station!!!!
Join Date: May 2004
Location: Catonsville, Maryland
Posts: 1,081
Likes: 0
Received 0 Likes
on
0 Posts
Personal preference is to use the stock gasket with a THIN film of permatex hi-temp copper rtv on both sides.
I find this helps seal the intake better than the stock gasket alone.
I have used only the rtv, but you have to be careful applying it or you'll use too much and pieces could come free on the inside and get into your engine.
I find this helps seal the intake better than the stock gasket alone.
I have used only the rtv, but you have to be careful applying it or you'll use too much and pieces could come free on the inside and get into your engine.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM