1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

idle question

Thread Tools
 
Search this Thread
 
Old Jun 21, 2004 | 09:27 PM
  #1  
high plaines shifter's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Jun 2004
Posts: 11
Likes: 0
From: nova scotia,canada
idle question

i have an 81 that starts right away but wont stay running unless i give it throttle, when i take my foot off it dies. anyone have any ideas
Reply
Old Jun 21, 2004 | 09:47 PM
  #2  
BigJim's Avatar
trainwreck
Tenured Member 10 Years
 
Joined: Jun 2003
Posts: 1,725
Likes: 2
From: Lake, Michigan
Umm raise its idle? Give it a tuneup? Hows it sound?
Reply
Old Jun 21, 2004 | 09:57 PM
  #3  
lovintha7's Avatar
Suicidal Death Missile
Tenured Member 05 Years
 
Joined: Mar 2004
Posts: 1,782
Likes: 0
From: Newport News, Virginia
Check the idle mixture screw. Does the car idle after it's warm? How does it idle?
Reply
Old Jun 21, 2004 | 10:09 PM
  #4  
OtakuRX's Avatar
The Rotorheaded Geek
Tenured Member 05 Years
iTrader: (1)
 
Joined: Mar 2002
Posts: 920
Likes: 0
From: exit 8 in Manchester, NH
I had the same problem, found it to be running way to lean. Check for vacuum leaks then adjust the mixture would be my suggestion.
Reply
Old Jun 22, 2004 | 09:14 PM
  #5  
high plaines shifter's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Jun 2004
Posts: 11
Likes: 0
From: nova scotia,canada
i was looking at the rats nest and found where someone previous to me plugged the rubber tube going to the shutter valve solenoid but didn't do anything to the metal tube it came off ,just left it open. also how do i know if the shutter valve is stuck on or not. oh yeah, i pulled the spark plugs out and the ones for the rear rotor were fouled. maybe i have more than one problem. problem
Reply
Old Jun 23, 2004 | 09:54 AM
  #6  
Old Tex's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Apr 2004
Posts: 93
Likes: 0
From: sunrise
check for any vaccum leaks. i had the same problem on my 12a and it was because one of the intake bolts was loose
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
DerpyToast
2nd Generation Specific (1986-1992)
14
Nov 23, 2024 05:19 PM
gxl90rx7
Haltech Forum
4
Sep 14, 2015 03:09 PM
rx7shirley
2nd Generation Specific (1986-1992)
6
Sep 2, 2015 02:11 PM




All times are GMT -5. The time now is 01:16 AM.