which is the idle adjust
#1
Senior Member
![](https://www.rx7club.com/images/misc/15_year_icon.png)
Thread Starter
iTrader: (4)
Join Date: Apr 2007
Location: bay area
Posts: 466
Likes: 0
Received 0 Likes
on
0 Posts
which is the idle adjust
just wondering which of these is the idle adjustment screw, my idle is a bit high and i want to get it down a bit . i know the air fuel mixture is right next to the idle screw and i dont want to mess with that and **** up my cars
![Smilie](https://www.rx7club.com/images/smilies/smile.gif)
#5
back in the game
Join Date: Apr 2008
Location: Grand Rapids, MI
Posts: 143
Likes: 0
Received 0 Likes
on
0 Posts
i know my idle adjustment screw is right out of sight under the bracket to the right of the mixture screw
![](http://i13.photobucket.com/albums/a270/jonvo4591/IM000809-1.jpg)
the bracket with the red arrow on it. underneath there. you might have to get your face down there to actually see it, but that's where mine is.
![](http://i13.photobucket.com/albums/a270/jonvo4591/IM000809-1.jpg)
the bracket with the red arrow on it. underneath there. you might have to get your face down there to actually see it, but that's where mine is.
#6
Moderator
![](/images/misc/20_year_icon.png)
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,957
Received 2,681 Likes
on
1,897 Posts
Trending Topics
#10
Full Member
Join Date: Jun 2008
Location: Clarksville, TN
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
If it was correctly set after initial install you should not mess with it.
If you still have to mess with it because accidentally touched it or so. Just get the book for the carb you are using and find the settings there.
Rule of thumb is: (Stock carbs use this settings)
1. set the idle to 770 by using the throttle screw
2 set the idle to highest rpm by turning the MIX screw
3 reset the idle speed to 770 by using the THROTTLE SCREW
4 Then adjust the idle to 750 using the MIX
as you are doing this note wich way increases and decreases on both screws
Sometimes you have to adjust the throttle sensor as well but I have been lucky most times. This is pretty simple to do.
I hope this helps
I was just looking at the post and realized you are probably talking about a carb that I may or not be familiar with.
I apologize I can't see pictures when I am at work. They are all blocked, you know government computers LOL
Anyway good luck with your carb.
Last edited by Pocket Trey; 06-17-08 at 02:12 PM.
#12
Full Member
Join Date: Jun 2008
Location: Clarksville, TN
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
And the mix is the one that can be easily seen or the one to your left.
People call them differently. I chose to use the correct term for them, but any name is all the same they usually do the same thing regardless if you call it fuel or air or any other name.
Im joking around with the name thing.
Juan
Last edited by Pocket Trey; 06-17-08 at 08:44 PM.
#13
![Smilie](https://www.rx7club.com/images/smilies/smile.gif)
#14
Moderator
![](/images/misc/20_year_icon.png)
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,957
Received 2,681 Likes
on
1,897 Posts
you basically adjust the idle air screw until you're close on rpms, then the idle mixture, then the idle air, etc etc until you get a nice smooth idle.
go as lean as you can with the idle mixture, it has a big impact on gas mileage
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
The1Sun
1st Generation Specific (1979-1985)
7
09-18-15 07:13 PM