i need a detailed guide of the 13bt conversion into a series 3
#1
Newbie
Thread Starter
Join Date: Aug 2003
Location: Sydney
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
i need a detailed guide of the 13bt conversion into a series 3
can anyone point me in the direction of a guide to a 13bt turbo conversion, start to finish from a carby 12a series 3
please
please
#2
Rotoholic Moderookie
iTrader: (4)
First thread on the page is about as close as you're gonna get.
This car doesn't have alot of custom "start-to-finish" mod manuals or pictorials. There are a few around for various different things, but for the TII swap you're just gonna have to rough it, do a search, read a lot, and ask a bunch of questions.
Have fun on the wiring.
Jon
This car doesn't have alot of custom "start-to-finish" mod manuals or pictorials. There are a few around for various different things, but for the TII swap you're just gonna have to rough it, do a search, read a lot, and ask a bunch of questions.
Have fun on the wiring.
Jon
#3
Eats, Sleeps, Dreams Rotary
iTrader: (52)
Yep! Not going to find any step by step catalogues on this conversion......However you can start by reading the sticky in the top of this forum. It lists MANY sites that will help you. And you can ask as many questions on this forum that you want!!!! What else could anyone ask for
Oh and don't put the stock ECU in.....go Haltech!
Good luck
Oh and don't put the stock ECU in.....go Haltech!
Good luck
Thread
Thread Starter
Forum
Replies
Last Post
toplessFC3Sman
2nd Generation Specific (1986-1992)
6
03-20-18 01:54 PM
ncds_fc
2nd Generation Specific (1986-1992)
19
09-15-15 12:03 AM