I Have A Double Belt Pulley. What Belt Size Do I Need??
#1
Junior Member
Thread Starter
Join Date: Nov 2004
Location: ELK GROVE,CA
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
I Have A Double Belt Pulley. What Belt Size Do I Need??
HEY ROTOR HEADS...
just wanted to know if i have a double alternator pulley , with a stock 12a. what size belt to i need.? will it give more power? what do i need to connect it. i have ac belt off. let me know.
i have an 84 rx7 gs. with 157k. i will be pulling the waterpump this weekend so i was going to get belt. also was the best thing to use to seal the water pump
just wanted to know if i have a double alternator pulley , with a stock 12a. what size belt to i need.? will it give more power? what do i need to connect it. i have ac belt off. let me know.
i have an 84 rx7 gs. with 157k. i will be pulling the waterpump this weekend so i was going to get belt. also was the best thing to use to seal the water pump
Last edited by SKETCHER2369; 12-11-04 at 01:05 PM.
#2
Junior Member
Thread Starter
Join Date: Nov 2004
Location: ELK GROVE,CA
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by SKETCHER2369
HEY ROTOR HEADS...
just wanted to know if i have a double alternator pulley , with a stock 12a. what size belt to i need.? will it give more power? what do i need to connect it. i have ac belt off. let me know. is it going to make more power. what are the good and bad points?
i have an 84 rx7 gs. with 157k. i will be pulling the waterpump this weekend so i was going to get belt. also was the best thing to use to seal the water pump
just wanted to know if i have a double alternator pulley , with a stock 12a. what size belt to i need.? will it give more power? what do i need to connect it. i have ac belt off. let me know. is it going to make more power. what are the good and bad points?
i have an 84 rx7 gs. with 157k. i will be pulling the waterpump this weekend so i was going to get belt. also was the best thing to use to seal the water pump
#4
FD > FB > FC
It may very well end up being one size bigger than the stock belt. the reason is because the dual belt alternator pulley is an underdriven pulley so therefore it is a larger diameter pulley.
In my setup I have an underdriven alternator and main pulley. I am able to use the stock belt, but keep in mind that the underdriven main pulley is smaller than the stock one, basically making up for the size difference from the bigger alternator pulley
In my setup I have an underdriven alternator and main pulley. I am able to use the stock belt, but keep in mind that the underdriven main pulley is smaller than the stock one, basically making up for the size difference from the bigger alternator pulley
Thread
Thread Starter
Forum
Replies
Last Post
[For Sale] Scratch & Dent, Used, and Open-Box Sale!
SakeBomb Garage
Vendor Classifieds
5
08-09-18 05:54 PM
rx8volks
Canadian Forum
0
09-01-15 11:02 PM