How hard is it to remove the front bumper cover?
#1
On the prowl for an FB
Thread Starter
iTrader: (1)
Join Date: Sep 2002
Location: Surrounded by Sebey parts, Rhode Island
Posts: 2,932
Likes: 0
Received 6 Likes
on
4 Posts
How hard is it to remove the front bumper cover?
I want to get started on a little project, but it's currently snowing (yes, ******* snowing...) so I want to know if I can get it off quickly enough in the freezing cold. How hard is it?
#2
Old Fart Young at Heart
iTrader: (6)
Remove the signal lenses, push the units through the bumper. The bumper itself is held on by 2 14mm head bolts that are accessed from the underside of the cover. There are 4 10mm head bolts for the lower valance and 1 for the grill. That should be all of them. Then slide the bumper and cover off of the bumper shocks, take assembly inside where it's warm.
It's sunny and 66 here today.
It's sunny and 66 here today.
#3
Burning Oil-Grinding 3rd
Originally Posted by $100T2
so I want to know if I can get it off quickly enough in the freezing cold. How hard is it?
Last one took me 15 minutes. But I dont remember what you have to do to get it off. IIRC a philips and then pop some clips.
Thread
Thread Starter
Forum
Replies
Last Post