how hard is a gsl-se suspension swap on a 82 gsl?
#1
Full Member
Thread Starter
Join Date: Jan 2005
Location: gaffney, sc
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
how hard is a gsl-se suspension swap on a 82 gsl?
hey as most of you have read i need the 4x114.3 pattern for my car......what do i need from a gsl se and how hard would it be??
#4
Junior Member
Join Date: Jan 2005
Location: Gibbons Alberta Canada
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
I think if Im not mistaken that you wold nead all the suspension off of the gsl se and I do mean every thing from front to back including the rear dif but as far as I know If you have the entire setup off of the gsl se it should bolt right on. I hope that helps .
#7
Rotary Enthusiast
iTrader: (1)
'84-5 struts and spindles are different, caliper brackets are different, front and rear. '84-5 rear axles won't fit in earlier rearends, so, no, you can't.
You can put the SE axles in an '84-5 GSL rear (not GS - bolt pattern on the axle housing end flanges is different for the drums), and probably swap the calipers and brackets. Likewise, you probably can swap the SE rotors and calipers & brackets to '84-5 12A struts.
You can put the SE axles in an '84-5 GSL rear (not GS - bolt pattern on the axle housing end flanges is different for the drums), and probably swap the calipers and brackets. Likewise, you probably can swap the SE rotors and calipers & brackets to '84-5 12A struts.