ON the driver side there are a few wire connectors that arent connected to anything at all. I just wanted to know if this was normal. One has a relay plugged into it (yellow 20a) and the other two just sit becide that one and dangle. Are they supposed to have relays too?





The OD switch is controll by relay which is in turn controlled by a computer, now if i just hack the relay wires off of the wiring harness, run one wire directly to the OD switch under the console, and the other directly to a ground on the engine, when i press the button, the OD should turn on correct? Just a theory, should work, any thoughts?

I was thinking of making a header but i said **** it and leave it to the professionals at racing beat. Im ordering a header directly from racing beat, unassembled, welding it myself. Then Im making my own collector, and straightpiping the exhaust to a cherrybomb perf-muffler at the end with a dual tip.



Plus a few pictures



With rats nest



Without (yummy)

 

No one?

 

Sorry man, I don't have an auto in mine. I might be able to help if you had some pix of the wires in question though...

 

IIRC, I have a few connectors over there that arnt plugged into anything. I'm also in the process of removing all the unnecessary wiring from my car, it's quite the task

 

YA no kidding, found two on the driver side, one near the radiator, and one on the passenger side. Plus the 8 i removed for the rats nest.