Help me, how to make a turbo oil return line.
#1
Help me, how to make a turbo oil return line.
I was looking in the Turbo II thread but its too damn long.
can someone help me with making the turbo oil line.
Where can I get the adapter and where should I drill and tap the return port?? front cover??
TII guys, post your exact setup if you could and ill just copy one.
THanks alot.
Ill have the engine in the car and somewhat hooked up by next weekend. I have to finish a roll of film and get a photo CD and ill have pics
can someone help me with making the turbo oil line.
Where can I get the adapter and where should I drill and tap the return port?? front cover??
TII guys, post your exact setup if you could and ill just copy one.
THanks alot.
Ill have the engine in the car and somewhat hooked up by next weekend. I have to finish a roll of film and get a photo CD and ill have pics
#2
Most people drain it back to the front cover. But if you drill/tap the front cover you probably would want to do it with it off the engine. I kinda screwed myself on this deal because I thought I would just send the oil back to the rear plate (the twin turbo engines have a hole back there for the rear turbo drain) but then I built my manifold and it won't allow me to do it that way So now I think I'm going to have to pull my front cover off again to drill/tap a new hole in it Most people do it right under the OMP.
#3
Yeah, shutup kid.
I'm doing mine right under the OMP. With everything I have taken off(almost everything) I don't see any problem in drilling and tapping it with the front cover still on.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
KAL797
Test Area 51
0
08-11-15 03:47 PM