help light switch turns on my wipers
I'm sorry, but that's the funniest thing I've ever heard!
bwahahahahahahahahahahahaha!!!!
*cough*
ahem.
now that I've got that out of the way....
Somewhere under your dash someone hooked up some of the wiring wrong. It should be pretty simple to figure out, there's not really a lot of them under there. Just connect the wires that work your wpiers to the wiper switch, and the wires that work the lights to the light switch, and the wires that work the horn to the horn!
bwahahahahahahahahahahahaha!!!!
*cough*
ahem.
now that I've got that out of the way....
Somewhere under your dash someone hooked up some of the wiring wrong. It should be pretty simple to figure out, there's not really a lot of them under there. Just connect the wires that work your wpiers to the wiper switch, and the wires that work the lights to the light switch, and the wires that work the horn to the horn!
Mmmm Wankel Juice
Joined: May 2004
Posts: 444
Likes: 1
From: Erie, PA
You have one of two problems.. You either have a major ground wire corroded (double check them all and clean every connection)
You may have a serious problem with your combination switch on the column. You should check the grounds before you tear off your combo switch and replace that. Good luck..
You may have a serious problem with your combination switch on the column. You should check the grounds before you tear off your combo switch and replace that. Good luck..