1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

Help I Need A New Fuel Tank Sending Unit

Thread Tools
 
Search this Thread
 
Old Nov 22, 2004 | 11:52 AM
  #1  
paul tucker's Avatar
Thread Starter
Newbie
 
Joined: Nov 2004
Posts: 1
Likes: 0
From: s.c.
Exclamation Help I Need A New Fuel Tank Sending Unit

CAN SOME ONE TELL ME WHERE I CAN BUY A NEW FUEL TANK SENDING UNIT ...MY MAZDA DEALER SAYS THERE NO LONGER AVAIL
..I HAVE AN 83 GSL WITH A 82 TANK BOTH WERE RUSTED BAD ...MY (GOOD) I THOUGHT UNIT ONLY READS 1/2 ON GUAGE WHEN FULL I'M PRETTY SURE IT'S LINED UP RIGHT BUT MABEY NOT PLEASE HELP DEVONAANDPAUL@JUNO.COM
Reply
Old Nov 22, 2004 | 11:55 AM
  #2  
vipernicus42's Avatar
Rotoholic Moderookie
Tenured Member: 20 Years
iTrader: (4)
 
Joined: May 2002
Posts: 5,972
Likes: 37
From: Ottawa, Soviet Canuckistan
Welcome to the forum.

DON'T WRITE IN CAPS LOCK - IT IS THE EQUIVALENT OF YELLING AT THE TOP OF YOUR LUNGS AND IS CONSIDERED RUDE AND HARD TO READ!!!

www.mazdatrix.com - $100USD, the only place I've found. I bought one for my '84.

Jon
Reply
Old Nov 22, 2004 | 12:01 PM
  #3  
IanS's Avatar
Ricer
Tenured Member 15 Years
iTrader: (4)
 
Joined: Jun 2004
Posts: 4,424
Likes: 1
From: Washington, Iowa
Try cleaning the plug first. Mine didnt work at all becasue of all the corrosion
Reply
Old Nov 22, 2004 | 01:37 PM
  #4  
Felgar's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: Nov 2003
Posts: 457
Likes: 0
From: Calgary, AB
Agreed Ian. If the corrosion is to the point that it's completely broken the guage will read completely empty. I bet it just needs a good cleaning.
Reply
Old Nov 22, 2004 | 03:22 PM
  #5  
vipernicus42's Avatar
Rotoholic Moderookie
Tenured Member: 20 Years
iTrader: (4)
 
Joined: May 2002
Posts: 5,972
Likes: 37
From: Ottawa, Soviet Canuckistan
And as a tip: If you buy the new guage, take the tank out and have a gas tank shop put it in. It cost me $50 CDN, but they flushed all the crap out of the tank, giving it a thorough cleaning, they installed my sender, and even installed another ground wire and sealed it with rustproofing sealer!

Not bad.. especially considering how much varnish I had in the bottom of my tank after it had sit for so many years.

Jon
Reply
Old Nov 22, 2004 | 03:27 PM
  #6  
Jeff20B's Avatar
Lapping = Fapping
Tenured Member 15 Years
iTrader: (13)
 
Joined: Aug 2001
Posts: 15,725
Likes: 91
From: Near Seattle
Would the sender from a GLC tank fit a 7's tank? Maybe you could swap the rod or something?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
alphawolff
1st Generation Specific (1979-1985)
17
Nov 17, 2015 05:57 PM
KAL797
Test Area 51
0
Aug 11, 2015 03:47 PM




All times are GMT -5. The time now is 06:26 PM.